Hi Rob
From the device file:
> pragma fuse_def OSC:1 0xF {
> HS_PLL = 0xE
> HS_USB = 0xC
> XT_USB = 0xA
> INTOSC_NOCLKOUT = 0x9
> EC_NOCLKOUT = 0x7
> XT_PLL = 0x2
> }
From the datasheet:
> 1. XT Crystal/Resonator
> 2. XTPLL Crystal/Resonator with PLL enabled
> 3. HS High-Speed Crystal/Resonator
> 4. HSPLL High-Speed Crystal/Resonator
> with PLL enabled
> 5. EC External Clock with FOSC/4 output
> 6. ECIO External Clock with I/O on RA6
> 7. ECPLL External Clock with PLL enabled
> and FOSC/4 output on RA6
also from datasheet:
> bit 3-0 FOSC3:FOSC0: Oscillator Selection bits(1)
> 111x =HS oscillator, PLL enabled (HSPLL)
> 110x =HS oscillator (HS)
Continues in next post.
---
ir EE van Andel [EMAIL PROTECTED] http://www.fiwihex.nl
Fiwihex B.V. Wierdensestraat 74, NL7604BK Almelo, Netherlands
tel+31-546-491106 fax+31-546-491107
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---
