I tried to use the ADC-hardware library, and it didn't become happy!
I have a little test board with a 12F675, potmeter and some LEDs. I have used this board with my own ADC routines (written in C) and PWM output to the LEDs. Now I want to try it with Jal and though to use the ADC library. But by reading the comments in the ADC library (the html file is nothing better) I did not get the slightest idea of how to use this library, there is nothing that looks like user instructions. I don't think it is a good idea to release 'undocumented' libraries. As first time user of Jal libraries (in fact I am!) I would not immediately become very enthousiastic, to say it mildly, and I would have my doubts about the other libs. So I looked for a sample to help me get started. And indeed it has some additional info, I think I can manage. In my opinion an example should *only* a bridge between theory and practice. But there was no theory to read in this case. The explanation of how to use the library, the required constants and variables and their meanings should be in the library(-docs) itself, and could also be more explanatory! Now I want to see the other libraries... Regards, Rob. -- Rob Hamerling, Vianen, NL (http://www.robh.nl/) --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
