I'll look into this today. 2009/3/28 Rob Hamerling <[email protected]>: > > > Hi Joep, > > Since I needed to change my sample for the serial_hw_int_cts library I > thought I would be a good idea to test it once again. I hadn't tested it > after your refacturing of the serial libs. The sample seems _not_ to > work properly, most of the times it echoes other things than it > received. Did you test it after the refacturing? > > I'm not sure why it doesn't work. One of the things that came to my > mind: FSR is used in the interrupt handler (and also in the mainline), > but the compiler doesn't save/restore it automatically with interrupt > handling. I'm sure I needed this save/restore in the C-program from > which I created the serial_hw_int_cts library. So probably this is > required here too. > On the other hand it seems to have worked before, so maybe there is > something else. > > Regards, Rob. > > > > -- > Rob Hamerling, Vianen, NL (http://www.robh.nl/) > > > >
--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
