Hi Joep
Joep Suijs wrote: [RobH] >> As I said, when I do not use the backlight lib the board including LCD >> works find with both PICs. So it seems to me that either the PWM lib or >> the backlight lib is the bad guy. > It looks that the backlight (or actually, the pwm code) is. > I made a small change to the code. It is a long shot, but could you > check if it works? > If it does not work, somebody should dig into this... Thanks! The 16f886 behaves now as expected! Switching on/off and fading in/out works now the same as with the 16f876A. It seems you hit the nail on the head. In the meantime I had a look in the PWM lib and was about to suggest to initialise the shadow registers (I had a discussion with Kyle about initialising shadow registers in the device files). I'll wait a little with further tests (PWM2, etc). Regards, Rob. -- Rob Hamerling, Vianen, NL (http://www.robh.nl/) --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
