Hi guys,
Sebastien Lelong wrote:
> New pinmap.py and other dependent files re-generated. Rev. 1077
This version seems to solve all previous problems I had with duplicate
alias names. Multiplexed function pins are declared with a pin-suffix to
make the distinction. For example the CCP1 pin of the 16F88 will be
declared as:
var volatile bit pin_CCP1_RB3 is pin_B3
var volatile bit pin_CCP1_RB0 is pin_B0
Depending on fuse_def CCP1MUX either the first or the second will be the
active CCP1 pin.
In the upcoming version of device files the ANSEL bits will be declared
in the format:
var volatile bit JANSEL_ANSx at <reg> : <bit>
in which x can be a number 0 to 21 (or whatever the maximum is)
Note: I have chosen the prefix 'JANSEL' as pseudo register name. If
anyone has objections and/or a better suggestion....
And there will also be a
const byte ADC_NTOTAL_CHANNEL = <number>
indicating the actual number of available ADC channels (could be 0).
All blink-an-LED samples compile without errors and I don't see any
reason not to release the new device files real soon now (tomorrow).
Regards, Rob.
--
Rob Hamerling, Vianen, NL (http://www.robh.nl/)
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---
