Hi, Sorry to bother, but can I find this disassambler option in MPLAB IDE ? I've searched everywhere...
Thanks Seb -- Sébastien Lelong http://www.sirloon.net http://sirbot.org 2009/8/3 a.faber <[email protected]> > > Hi Seb, > Not a solution, what I did in the past to analyse these kind of problems, > is > after the download with the bootloader, readout the entire flash and config > with a ICSP (e.g. XWISP) and save the hex file, analyze > the hex file in MPLAB by importing and using the building dissassembler. > Albert > > > ----- Original Message ----- > From: "Sebastien Lelong" <[email protected]> > To: <[email protected]> > Sent: Monday, August 03, 2009 9:15 PM > Subject: [jallib] Bootloader on 18F2550 > > > Hi guys, > > I'm trying to prototype few things with a 18F2550. I've bought a FDTI > USB-to-serial converter, and would like to use a bootloader. So far, using > XWisp, I've been able to blink a LED, and use serial/echo. I programmed my > chip with a Tinybootloader for 18F2550 (included > TinyBld18F4550_20Mhz_115200.hex). When I upload the same sample using tiny, > it reports the upload is ok, but then nothing happens (no blink). I did not > forget to use -long-start this time... > > Any idea why it doesn't work ? > > Thanks > Seb > > jalv24lbeta -long-start -s ../include/device 18f2550_blink.jal > jal 2.4l-beta (compiled Jul 28 2009) > generating p-code > 0 errors, 0 warnings > 9159 tokens, 86588 chars; 1883 lines; 2 files > live variable analysis iterations: 1 > generating PIC code pass 1 > generating PIC code pass 2 > writing result > Code area: 93 of 16384 used > Data area: 3 of 928 used > Software stack available: 925 bytes > Hardware stack depth 0 of 31 > > > > -- > Sbastien Lelong > http://www.sirloon.net > http://sirbot.org > > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
