Hi Seb,
Star
On 9 aug, 12:09, Sebastien Lelong <[email protected]> wrote:
> Hi,
>
> Sorry to bother, but can I find this disassambler option in MPLAB IDE ? I've
> searched everywhere...
>
> Thanks
> Seb
> --
> Sébastien Lelonghttp://www.sirloon.nethttp://sirbot.org
>
> 2009/8/3 a.faber <[email protected]>
>
>
>
>
>
> > Hi Seb,
> > Not a solution, what I did in the past to analyse these kind of problems,
> > is
> > after the download with the bootloader, readout the entire flash and config
> > with a ICSP (e.g. XWISP) and save the hex file, analyze
> > the hex file in MPLAB by importing and using the building dissassembler.
> > Albert
>
> > ----- Original Message -----
> > From: "Sebastien Lelong" <[email protected]>
> > To: <[email protected]>
> > Sent: Monday, August 03, 2009 9:15 PM
> > Subject: [jallib] Bootloader on 18F2550
>
> > Hi guys,
>
> > I'm trying to prototype few things with a 18F2550. I've bought a FDTI
> > USB-to-serial converter, and would like to use a bootloader. So far, using
> > XWisp, I've been able to blink a LED, and use serial/echo. I programmed my
> > chip with a Tinybootloader for 18F2550 (included
> > TinyBld18F4550_20Mhz_115200.hex). When I upload the same sample using tiny,
> > it reports the upload is ok, but then nothing happens (no blink). I did not
> > forget to use -long-start this time...
>
> > Any idea why it doesn't work ?
>
> > Thanks
> > Seb
>
> > jalv24lbeta -long-start -s ../include/device 18f2550_blink.jal
> > jal 2.4l-beta (compiled Jul 28 2009)
> > generating p-code
> > 0 errors, 0 warnings
> > 9159 tokens, 86588 chars; 1883 lines; 2 files
> > live variable analysis iterations: 1
> > generating PIC code pass 1
> > generating PIC code pass 2
> > writing result
> > Code area: 93 of 16384 used
> > Data area: 3 of 928 used
> > Software stack available: 925 bytes
> > Hardware stack depth 0 of 31
>
> > --
> > Sbastien Lelong
> >http://www.sirloon.net
> >http://sirbot.org
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---
