Hi Rob, I have copy your code (the following) into my Jal Edit and i have compile it:
======================================================= include 12f629 -- target PICmicro -- -- This program uses the internal oscillator at 4MHz pragma target clock 4_000_000 -- oscillator frequency -- configuration memory settings (fuses) pragma target OSC INTOSC_NOCLKOUT -- internal oscillator pragma target WDT disabled -- no watchdog pragma target MCLR external -- reset externally -- enable_digital_io() -- disable analog I/O (if any) -- -- You may want to change the selected pin: alias led is pin_A0 pin_A0_direction = output -- forever loop led = on _usec_delay(250000) led = off _usec_delay(250000) end loop ====================================================== The next .hex file is created: ====================================================== :020000040000FA :100000000508A200073099008316051083122214F8 :100010002208850083120313FB30A000C630A10024 :100020000A128A11A10B10280A128A11A00B0E289D :10003000000022102208850083120313FB30A00069 :10004000C630A1000A128A11A10B22280A128A11B5 :08005000A00B20280000062887 :02400E00F4318B :00000001FF ====================================================== When i load this .hex file into my 12F629 chip, pin A0 is not going high and low. You have tested your code (your .hex file) in your 12F629 chip en pinA0 is going high and low OK. Can you give me, or can you compare what the different is between your and my .hex file? The only reason that your code is working OK at your chip and not at my chip, is that your .hex file is not the same as my .hex file. PinA0 of my chip is OK, because when i load the .hex file of Wouter, pinA0 is going high and low. I am very interesting what your .hex file is. Best regards, Jan Willem --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
