maybe you can add something to my jstring.jal in files section. Regards, Hafiz
On Feb 15, 7:45 pm, "m...@watty" <[email protected]> wrote: > Arrgh hit the send by accident > > On Feb 15, 11:28 am, "m...@watty" <[email protected]> wrote:> I think this > is a good start. > > > I'll be adding (used in my current project) > > StringToBCD -- makes packed BCD, two digits per byte/character > BCDtoString -- expands packed BCD, two digits per byte to ASCII > Ltrim, Rtrim -- trims of spaces > Instr ---returns position of a character in string, starting search > from nth position > Spaces-- makes a string > Zeros-- adds N zeros to end of string > BCDInc, BCDDec -- increments or decrements packed BCD. > -- the BCD in these cases can be string where the ASCII values > represent packed BCD, i.e. chr(16 +1) is 11 BCD > Mid -- returns substring at position X of length L > > Why? Because I prototype PIC projects in VB6 :-) It's very rapid and > easy to debug. Any type LCD / keypad is easily simulated. The serial > port handshake pins can be 2 or 3 output pins and 3 or 4 input pins > controlling/reading the real hardware a PIC will connect to (I've read > IR remote detectors, tx/RX on 433MHz modules, I2C, four wire I/O, RDS > decoder chip, relays, Microswitches etc all via the RS232 port in XP > on VB6. > > I'm debugging Graphics & text features for PIC + KS0108 / KS0107 > 128x64 GLCD successfully with 128x64 array of shapes for dots. I'm > using same font data as PIC JAL program. I'll post the revised GLCD/ > Text JAL libraries (developed / debugged in VB6 and tested on 16F877 + > JE-AN12864 which is KS0108 type GLCD). > All the VB code for timing keypad interaction and other features is in > a 10ms (lowest possible) Timer Event in VB as if a timer Interupt on > PIC. -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
