Hi Mike, Check 18f4550_i2c_hw_l1.jal sample file, it is running (though have not checked it lately) out of the box with a ,24LC256, it assumes that the external EEPROM is configured at i2c address A0.. Albert
On Feb 25, 10:24 pm, "m...@watty" <[email protected]> wrote: > OK > foundhttp://code.google.com/p/jallib/source/browse/trunk/include/external/... > > I presume it's just one more bit in address for 24LC512. Seem similar > on datasheet. > > This library work for 18F4550 and 16F877 (different pins) using HW > I2C? > > On Feb 25, 9:14 pm, "m...@watty" <[email protected]> wrote: > > > > > I'm expecting my 18F4550 parts any day :) Meanwhile I'm simulating > > entire application in VB6 and gradually porting to the PIC 16F877A to > > be shortly replaced by 18F4550. > > > I was looking at the I2C and first looked at > > include I2c_hardware > > include i2c_level1 > > > then I heard there was a eprom_24LC512 library. Except I don't have it > > in my Jalpack, nor the 18F45x sample that uses it. -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
