Hi Vasile, I never used this and that might be the reason II don't understand why you want to switch. What is confusting to me is '0' (=0x30) vs 0x00 is confusting to me. It looks to me that the custom characters are always available at character location 0x00-0x07, while 0x30 to 0x39 represent the characters '0' to '9'. So lcd = '0' should give a zero and lcd = 0 should show the first char you defined.
Joep PS This is pretty informative: http://solar-blogg.blogspot.com/2009/02/displaying-custom-5x8-characters-on.html 2010/5/5 vasile surducan <[email protected]>: > Hi all, > I want to use print and format libraries with custom defined numbers (0...9 > bold) on HD44780 compatible via lcd'put procedure and can't figure how. LCD > has 8 CGRAM addresses location, meaning at least two numbers must be > overdefined (defined every time before using them). This is OK, the problem > is how do I switch the font table from 0x30...0x39 which represent the 0...9 > build in characters to 0x00 ...0x07 which are the newer CGRAM defined > characters? > thx, > Vasile > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
