Hi Seb, May I suggest the 18F67J60 or one of its close cousins? It has all ethernet hardware (mac and phy) built in-- just add connector. Also it should run JAL just fine. Just replace the JAL ne2000 'driver'. I did a similar replacement for JAL WIFI - a wireless chip instead of ethernet chip.
You can buy boards ready-made (like PIC-MICRO-WEB from Olimex or Sparkfun) or build one from parts from Wouter. William On Aug 23, 8:22 am, Sebastien Lelong <[email protected]> wrote: > Hi guys, > > I was browsing around for some TCP/IP stack information, including smalltcp > as William mentioned it some weeks ago. I also had a look at Microchip AN833 > TCP/IP stack. It seems both requires a NIC card, like RTL8019AS (or NE2000 > compatible from what I can read). Does a full *software* stack implementing > PHY/MAC layers seem possible to you, or is a NIC really needed (there are > Ethernet PICs too, but I'm considering pure software implementation) ? Even > very slow ? > -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
