Well, I didn't saw the Vasile's post, in Google Reader I get them with delay... sorry.
On Jan 16, 12:11 pm, "funlw65(Vasi)" <[email protected]> wrote: > Hi Olivier > > > If you're reading continuously, do this: > > - read value from last conversion > > - start new conversion > > - rely on the main program not to read again before the conversion has > > finished > > You can continue to read continuously because you will always get the > previous value, until the device will finish reading and write in his > scratchpad the new one! This can be deduced form my working sample. > > After the first complete conversion (until then you get a value of > ~80), you will get always the previous correct value. It will not be > changed again to a wrong value because we not read directly the sensor > of the DS18B20 device - only what it is putting in the scratchpad. > > > Greets, > > Kiste -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
