Hi Rob, Some more feedback. I'm running this chip using a 16MHz crystal. I took your sample, modified 20_000_000 to 16_000_000, matching my Xtal speed. Indeed, LED is blinking, but not at proper rate (compared visually with jaluino medium, which I know working good). Fuses are exactly the same, PLLDIV/CPUDIV disabled, etc... Actually, it's as though it was running twice faster: if I specify 8_000_000, it seems to blink properly.
Some more test using serial: specifying 16MHz just gives garbage chars. Specifying 8MHz, receiving chars works good, but sending chars doesn't work ! So, do you remember it was working properly (blink) ? Have you tested some more functionnalities with this chip ? TIA Cheers, Seb 2011/3/22 Rob Hamerling <[email protected]> > > Hi Seb, > > > On 2011/03/22 20:31, Sebastien Lelong wrote: > >> >> FWIW, blinking sample for 18f27j53 is working nicely (only changed led >> pin and clock). I've seen it's already in TORELEASE file, so probably >> already tested, but I wanted to report anyway. >> > > Yes! Thank you Microchip for the generousity of your sample service! > > Regards, Rob. > > -- > R. Hamerling, Netherlands --- http://www.robh.nl > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > > -- Sébastien Lelong http://www.sirloon.net http://sirbot.org -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
