It is true, you should use all devices that are the same mode. This does provide a solution for this example, however sometimes you cannot find devices that can all use the same mode.
Matt. On May 8, 10:45 am, William <[email protected]> wrote: > Hi Matt, > > On May 8, 9:13 am, mattschinkel <[email protected]> wrote: > > > > > Any single device will only need one SPI mode. The above need for > > changing SPI modes is real for me, and therefore I cannot use Williams > > MAC eeprom ee_25aa02e48.jal library with sd card + enc28j60 unless I > > manually set mode in my sample every time I wish to read or write to > > 25aa02e48. This should be taken care of in the library, not the > > sample. > > I agree that enc28j60 requires mode 00, but the mac eeprom supports > both (see datasheet), and I always run my SD in my 00, so you might > try running all of your devices in 00 as well. By the way, that mac > eeprom is also available in i2c. > > William -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
