There are not many people using JAL0.4x, but there are lots using JALv2. I suggest you download the jallib pack and compile the blink sample provided there: http://code.google.com/p/jallib/downloads/list
You'll find more good info at justanotherlanguage.org Matt. On Oct 25, 5:11 am, electro_phunk <[email protected]> wrote: > Hi guys, > > I have searched high and low and it seems no one really uses Jal > anymore and thus no one could help me. I have a problem with Jalv2, > when I compile the following code: > > include 16f628a > > pin_b1_direction = output > pin_b2_direction = output > pin_b3_direction = output > > pin_a1_direction = input > var byte leds = 0 > portb = 0 > > forever loop > > if pin_a1 then > > leds = leds <<1 > > leds = leds + 1 > > delay_1s(1) > > portb = leds > > end if > > end loop > > It compiles ok, but when I try to program it then I get an error: > error write config - w, wrote 3D02 read 3F02. Then after I click ok > pin B1 and B2 lights up and does not go off no matter what I do. I > tried 3 brand new pics and also a JDM style programmer and a Velleman > K8048 but still the same problem persists. The program runs ok appart > from the above mentioned pins. What could be the problem? Inc file? > please if there is anyone out there to help me then it would be highly > appreciated. -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
