ok, I see now, I'll check for otherr values than 0. maybe when the library is in debug mode, we can check for some specific values, say for 50 times instead of forever. cheers seb Le 29 nov. 2011 10:38, "mattschinkel" <[email protected]> a écrit :
> As you have probably read, high capacity cards init differently and I > could be wrong about getting 0x00 when the card is ready after the go > idle command. > > There are C examples you can look at, for example: > > http://www.dharmanitech.com/2009/01/sd-card-interfacing-with-atmega8-fat32.html > http://docs.google.com/Doc?id=ddmkwx3z_33ft2tprgq > > Your test program should be put in the sd_card library as a procedure. > > Your blogs would be nice to mirror to justanotherlanguage.org. > > Matt. > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > > -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
