Updates:
Status: Started
Comment #1 on issue 191 by robhamerling: I2C slave mode possible malfunction
http://code.google.com/p/jallib/issues/detail?id=191
The address 'sharing' of SSPMSK, SSP1MSK and SSP2MSK with SSPADD, SSP1ADD,
SSP2ADD
applies to the following PICs:
16f677/687/689/690,
16f707/720/721
16f722/723/724/726/727
16f722a/723a
16f882/883/884/886/887
18f2xj13,18f2xj53,18f4xj13,18f4xj53
18f6xk22,18f8xk22
(and their LF variants if any)
Solution: add pseudo variables to the device files for the SSPxMSK
registers which set the SSPM bits in SSPxCON to 0b1001 (and reset before
return) when accessing SSPxMSK for read or write.
Note: none of the current Jallib libraries and samples use SSPxMSK!
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
Visit this group at http://groups.google.com/group/jallib?hl=en.
For more options, visit https://groups.google.com/groups/opt_out.
