On 2013/08/16 11:31, Rob Hamerling wrote:
BTW I'm currently looking at the default fuse settings and stumbled once again on contradictions in the Microchip docs. The datasheet of the 10f200 says > bit 11-5 Unimplemented: Read as ‘0’ but the programming specification of the 10F200 says: > bit 11-5 Unimplemented: Read as ‘1’ Both docs have been revised several times! How can one ever get proper default settings in the Jallib device files?
The proof of the pudding is in the eating! I bulk-erased a 10F222 and read back the configuration bits: all '1'. So this time not the datasheet, but the programming specification is right. May I consider it as an exception to a Jallib rule ("the datsheet is always right") and set the default configuration bits for the 10F222 to 0b1111_1111_1111 ?
Regards, Rob. -- R. Hamerling, Netherlands --- http://www.robh.nl -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/jallib. For more options, visit https://groups.google.com/groups/opt_out.
