Hi Rob, Maybe the rule should be 'jallib conforms to the datasheet unless the datasheet is proven to be wrong'.
Joep Op vrijdag 16 augustus 2013 schreef Rob Hamerling ([email protected]): > > > On 2013/08/16 11:31, Rob Hamerling wrote: > > BTW I'm currently looking at the default fuse settings and stumbled once >> again on contradictions in the Microchip docs. The datasheet of the >> 10f200 says >> > bit 11-5 Unimplemented: Read as ‘0’ >> but the programming specification of the 10F200 says: >> > bit 11-5 Unimplemented: Read as ‘1’ >> Both docs have been revised several times! How can one ever get proper >> default settings in the Jallib device files? >> > > The proof of the pudding is in the eating! I bulk-erased a 10F222 and read > back the configuration bits: all '1'. So this time not the datasheet, but > the programming specification is right. May I consider it as an exception > to a Jallib rule ("the datsheet is always right") and set the default > configuration bits for the 10F222 to 0b1111_1111_1111 ? > > Regards, Rob. > > -- > R. Hamerling, Netherlands --- http://www.robh.nl > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at > http://groups.google.com/**group/jallib<http://groups.google.com/group/jallib> > . > For more options, visit > https://groups.google.com/**groups/opt_out<https://groups.google.com/groups/opt_out> > . > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/jallib. For more options, visit https://groups.google.com/groups/opt_out.
