Hello all, i have a problem with the following code. It works with the compiler 2.4o. But with the last 2.4q, the ccp1 doesn't work.
Maybe a compiler bug? Regards, Enzo -- chip setup include 16f877a pragma target clock 4_000_000 -- xtal frequency pragma target OSC xt pragma target LVP disabled pragma target WDT disabled enable_digital_io() include delay -- Configure PWM pin_ccp1_direction = output pin_ccp2_direction = output include pwm_hardware pwm_max_resolution(1) pwm1_on() pwm2_on() pwm1_set_dutycycle_percent(0) pwm2_set_dutycycle_percent(0) forever loop -- Moteur Avant pwm1_set_dutycycle_percent(100) pwm2_set_dutycycle_percent(100) delay_1ms (1000) -- Moteur Stop pwm1_set_dutycycle_percent(0) pwm2_set_dutycycle_percent(0) delay_1ms (1000) -- Spin Right pwm1_set_dutycycle_percent(90) pwm2_set_dutycycle_percent(90) delay_1ms (1000) -- Moteur Stop pwm1_set_dutycycle_percent(0) pwm2_set_dutycycle_percent(0) delay_1ms (1000) -- Moteur Arriere pwm1_set_dutycycle_percent(100) pwm2_set_dutycycle_percent(100) delay_1ms (1000) -- Moteur Stop pwm1_set_dutycycle_percent(0) pwm2_set_dutycycle_percent(0) delay_1ms (1000) -- Spin Left pwm1_set_dutycycle_percent(90) pwm2_set_dutycycle_percent(90) delay_1ms (1000) -- Moteur Stop pwm1_set_dutycycle_percent(0) pwm2_set_dutycycle_percent(0) delay_1ms (1000) end loop -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/jallib. For more options, visit https://groups.google.com/groups/opt_out.
