Phil, take a look also at 17F877_serial_print.jal in the sample folder.
Vasile On Wed, Feb 5, 2014 at 2:40 PM, Oliver Seitz <[email protected]> wrote: > Open the library source file, and you will find in the first lines: > > -- Description: Software RS232 library > -- Library supports software RS232 send and receive procedure on any > IO-pin. > -- Both the inverted and non-inverted routines are available, > -- so it should fit any hardware. > -- Baudrate can be set between 110 and 230_400 (for 20 Mhz Xtal), > -- for lower Xtal frequencies the maximum baudrate will be equally lower. > -- Baudrates are optimized, so even the high baudrates shouldn't be a > problem > -- (my [Stef] standard = 115_200 Baud, which has never given me any > problems). > -- Interrupts are disabled during transmissions. > -- Default parameters are 8 databits, 2 stopbits, no parity, no handshake. > -- . > -- To use this serial_software library in a user program: > -- . > -- 1. The following aliases must be defined: > -- serial_sw_tx_pin is pin_xy (any output pin) > -- serial_sw_rx_pin is pin_xy (any input pin) > -- . > -- 2. the following constants must be defined by the user program: > -- serial_sw_baudrate = 110 .. 240_000 > -- . > -- 3. The following constants may [optionally] be defined by the user > program: > -- serial_sw_invert = FALSE | TRUE (default: TRUE) > -- serial_sw_databits = 5 .. 8 (default: 8) > -- serial_sw_stopbits = 1 | 2 (default: 2) > -- . > -- 4. Include serial_software > -- . > -- 5. Set the selected serial_sw_tx_pin for output and > -- set the serial_sw_rx_pin for input. > -- . > -- 6. serial_sw_init() > -- > -- > ---------------------------------------------------------------------------- > > So, I don't think you have to modify the library. It must be configured > like described here. > > Greets, > Kiste > > ------------------------------ > *Von:* phil heintz <[email protected]> > *An:* [email protected] > *Gesendet:* 12:00 Mittwoch, 5.Februar 2014 > *Betreff:* [jallib] serial software with 18f452 library > > Hello > > Just including this library doesn't work > If somebody could give me some help to modify this library ... > It's a headache for me > Thanks a lot > Phil > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/jallib. > For more options, visit https://groups.google.com/groups/opt_out. > > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/jallib. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/jallib. For more options, visit https://groups.google.com/groups/opt_out.
