Thanks Vasile But where is this folder???
Sorry Phil Le mercredi 5 février 2014 13:50:36 UTC+1, vasile a écrit : > > Phil, > take a look also at 17F877_serial_print.jal in the sample folder. > > > Vasile > > > > > > On Wed, Feb 5, 2014 at 2:40 PM, Oliver Seitz <[email protected]<javascript:> > > wrote: > >> Open the library source file, and you will find in the first lines: >> >> -- Description: Software RS232 library >> -- Library supports software RS232 send and receive procedure on any >> IO-pin. >> -- Both the inverted and non-inverted routines are available, >> -- so it should fit any hardware. >> -- Baudrate can be set between 110 and 230_400 (for 20 Mhz Xtal), >> -- for lower Xtal frequencies the maximum baudrate will be equally lower. >> -- Baudrates are optimized, so even the high baudrates shouldn't be a >> problem >> -- (my [Stef] standard = 115_200 Baud, which has never given me any >> problems). >> -- Interrupts are disabled during transmissions. >> -- Default parameters are 8 databits, 2 stopbits, no parity, no handshake. >> -- . >> -- To use this serial_software library in a user program: >> -- . >> -- 1. The following aliases must be defined: >> -- serial_sw_tx_pin is pin_xy (any output pin) >> -- serial_sw_rx_pin is pin_xy (any input pin) >> -- . >> -- 2. the following constants must be defined by the user program: >> -- serial_sw_baudrate = 110 .. 240_000 >> -- . >> -- 3. The following constants may [optionally] be defined by the user >> program: >> -- serial_sw_invert = FALSE | TRUE (default: TRUE) >> -- serial_sw_databits = 5 .. 8 (default: 8) >> -- serial_sw_stopbits = 1 | 2 (default: 2) >> -- . >> -- 4. Include serial_software >> -- . >> -- 5. Set the selected serial_sw_tx_pin for output and >> -- set the serial_sw_rx_pin for input. >> -- . >> -- 6. serial_sw_init() >> -- >> -- >> ---------------------------------------------------------------------------- >> >> So, I don't think you have to modify the library. It must be configured >> like described here. >> >> Greets, >> Kiste >> >> ------------------------------ >> *Von:* phil heintz <[email protected] <javascript:>> >> *An:* [email protected] <javascript:> >> *Gesendet:* 12:00 Mittwoch, 5.Februar 2014 >> *Betreff:* [jallib] serial software with 18f452 library >> >> Hello >> >> Just including this library doesn't work >> If somebody could give me some help to modify this library ... >> It's a headache for me >> Thanks a lot >> Phil >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To post to this group, send email to [email protected]<javascript:> >> . >> Visit this group at http://groups.google.com/group/jallib. >> For more options, visit https://groups.google.com/groups/opt_out. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To post to this group, send email to [email protected]<javascript:> >> . >> Visit this group at http://groups.google.com/group/jallib. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/jallib. For more options, visit https://groups.google.com/groups/opt_out.
