Phil, If you have Bert's book (or you don't), ask him at [email protected], he's a nice guy will answer you.
Vasile On Thu, Feb 6, 2014 at 9:59 AM, phil heintz <[email protected]> wrote: > Hello Kiste and Vasile > > I just realized that I use "serial_softaware" included in Bert library > wich is different from "serial_software" from jalpack0.9.0!!! > > *1*. following alliases must be defined: > serial_sw_tx_pin is pin xy > serial_sw_tx_pin is pin xy > *to read with MicTerm, should I use pin_b6 & pin_b7?* > > *5* Set the selected serial_sw_tx_pin for output and > set the serial_sw_rx_pin for input. > *I don't undestand the action to do* > > Many many thanks to take time to explain me > Phil > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/jallib. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/jallib. For more options, visit https://groups.google.com/groups/opt_out.
