For the other question you have to set two PIC pins, one as input and the other as output and to connect your voltage converter (TTL to RS232 levels) to those pins.
On Thu, Feb 6, 2014 at 10:01 AM, Vasile Surducan <[email protected]>wrote: > Phil, > > If you have Bert's book (or you don't), ask him at [email protected], > he's a nice guy will answer you. > > Vasile > > > On Thu, Feb 6, 2014 at 9:59 AM, phil heintz <[email protected]> wrote: > >> Hello Kiste and Vasile >> >> I just realized that I use "serial_softaware" included in Bert library >> wich is different from "serial_software" from jalpack0.9.0!!! >> >> *1*. following alliases must be defined: >> serial_sw_tx_pin is pin xy >> serial_sw_tx_pin is pin xy >> *to read with MicTerm, should I use pin_b6 & pin_b7?* >> >> *5* Set the selected serial_sw_tx_pin for output and >> set the serial_sw_rx_pin for input. >> *I don't undestand the action to do* >> >> Many many thanks to take time to explain me >> Phil >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/jallib. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/jallib. For more options, visit https://groups.google.com/groups/opt_out.
