This list reminds me of two things... 1. Samples should be sorted into folders by sample name so we have a nice list like this one to work from.
2. Samples need to be renamed so we know what they are. Device names are not very descriptive. Of course, I have to ask... how did you make this list? I'm sure it's a simple, but it may be useful later. Matt. On Sunday, November 16, 2014 8:15:44 AM UTC-5, RobH wrote: > > > Maybe the list below is of interest? > First column is the number of samples, second column is the 'type' of > sample (derived from filename). > > 1 12leds > 1 1wire_ds1820 > 4 23k256 > 6 24lc256 > 3 adc > 10 adc_dependent > 1 adc_highres > 3 adc_independent > 3 adc_lowres > 5 backlight > 1 big_calendar > 15 bit_array > 475 blink_hs > 38 blink_hs_usb > 70 blink_intosc > 2 blink_intosc_usb > 1 blinkstop_on_interrupt_demo > 1 bmp085 > 1 can_monitor > 1 can_serial_adapter > 1 can_serial_hw > 2 canid4_monitor > 1 canid4_serial_adapter > 1 canopen_blink > 1 canopen_mcp2515_txhb > 1 co2_i2c > 2 co2_t6603 > 12 data_eeprom > 1 dds9850 > 1 dds_ad9833 > 12 debounce > 15 debug > 15 delay_basic > 1 dht11 > 7 digital_potentiometer_mcp4131 > 1 ds1307_hw > 1 ds1307_sw > 7 ds18b20_single > 1 dtmf_encoder_ht9200 > 1 dynamic_adc > 1 ee25aa02e48_lcd > 1 eusart2 > 3 fat32_pata_hard_disk > 4 fat32_sd_card > 6 fat32_small_pata_hard_disk > 7 fat32_small_sd_card > 1 flash_data > 2 glcd_ks0108 > 1 glcd_ks0108_math > 2 glcd_touch_stm032qvt_003 > 1 humidity_sht > 10 i2c_hw_l0 > 10 i2c_hw_l1 > 1 i2c_hw_master_echo > 13 i2c_hw_slave_check_bus > 13 i2c_hw_slave_echo > 13 i2c_hw_slave_eeprom_simulator > 13 i2c_hw_slave_msg > 15 i2c_sw_l0 > 15 i2c_sw_l1 > 15 i2c_sw_master_check_bus > 15 i2c_sw_master_echo > 12 in_and_out > 2 interrupt_on_change > 1 ir2serial > 9 ir_ranger_gp2d02 > 15 keyboard > 2 keyboard_lcd > 1 knight_rider > 9 large_array > 15 lcd_dsm0822a > 1 lcd_format > 14 lcd_hd44780_4_1 > 13 lcd_hd44780_4_4 > 1 lcd_hd44780_4_4_custom > 7 lcd_hd44780_4bit > 5 lcd_hd44780_8_1 > 5 lcd_hd44780_8_4 > 1 lcd_hd44780_8_8 > 7 lcd_hd44780_custom > 15 lcd_hd44780_pcf8574 > 2 math > 1 max7219_1_spi_hw > 2 max7219_1_spi_sw > 1 max7219_7_spi_hw > 1 max7219_n_spi_hw > 2 max7219_n_spi_sw > 1 mcp2515_can_monitor > 1 mcp2515_canid4_monitor > 1 mcp4922 > 1 memory_pointer > 3 mp3_decoder_vs1053b_pata_hard_disk > 3 mp3_decoder_vs1053b_sd_card > 1 network_all_in_one > 1 network_ping > 1 network_slip_isr_ping_udp > 1 network_tcp_client > 1 network_tcp_server > 1 network_udp_client > 1 network_udp_server > 1 network_webserver_enc28j60 > 1 nokia_3310_font > 1 nokia_3310_gfx > 1 nokia_3310_pixel > 1 nokia_3310_sprite > 1 oxygen_goel370 > 6 pata_hard_disk > 1 period_skip > 1 pintools > 1 pll > 1 pps_rx2tx2 > 1 pressure > 13 print_large_number > 1 print_large_number2 > 1 ps2_keyboard > 3 pwm2 > 2 pwm_adc > 1 pwm_adc_freq > 1 pwm_adc_res > 15 pwm_led > 15 pwm_led_highres > 15 pwm_sound > 15 queue > 15 random > 1 remember_me > 2 rtc_lcd > 1 rtc_lcd_125khz > 1 rtc_lcd_20mhz > 1 rtc_lcd_4mhz > 1 rtc_mcp7940 > 1 rtc_pcf8563 > 2 rtc_timeset > 1 rtc_tmr3 > 1 rtcc_hw_alarm > 1 rtcc_hw_kbd_lcd > 7 sd_card > 1 sd_card_minix_demo > 1 sd_card_minix_read > 1 sd_card_minix_readi > 15 serial_format > 15 serial_hardware > 2 serial_hardware2 > 2 serial_hw2_int_cts > 15 serial_hw_echo > 15 serial_hw_int_cts > 1 serial_hw_int_cts_echo > 15 serial_print > 8 serial_software > 8 serial_sw_echo > 3 servo_rc_master > 3 servo_rc_master_dedicated_master_i2c > 3 servo_rc_master_dedicated_slave_i2c > 6 servo_rc_slave > 4 seven_segment > 14 sirc > 7 slip_isr > 7 slip_poll > 2 slip_poll_usb > 1 spi_slave_hw > 15 sqrt > 15 sr_74595 > 15 startersguide > 1 stepper_unipolar_blocking > 1 stepper_unipolar_nonblocking > 15 stopwatch > 1 tc77 > 1 temperature_fan > 1 temperature_max6675 > 12 temperature_tc77 > 1 test_mlx90615 > 15 timer0_interval > 1 timer0_isr_interval > 3 timer3 > 16 tm1638 > 17 tm1640 > 9 tmr0_poll_interval > 3 usb_bootloader > 5 usb_bootloader_autostart > 5 usb_hid_generic > 3 usb_hid_keyboard > 5 usb_hid_mouse > 1 usb_msd_pata_hard_disk > 1 usb_msd_sd_card > 5 usb_serial > 3 ws2812b_async > 2 ws2812b_spi > 3 ws2812b_sw > 3 ws2812b_sync > 1 xbee_api_rx > 1 xbee_api_tx > > > -- > R. Hamerling, Netherlands --- http://www.robh.nl > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/jallib. For more options, visit https://groups.google.com/d/optout.
