New features proposed
Note: This list is for the libraries, not the compiler. If you want to set the configuration register. Is calculated before you compile (bit2-LAN1 + bit1-LAN0) in, if you make a BIT pattern, you can to reduce the program. ANSELB = (128 + 64 + 32 + 16 + 8 + 4 + 1); no problem ANSELB = (AN6 + AN5 + AN4 + AN3 + AN2 + AN1 + AN0); error. You can set constants for AN6..AN0 if you really want to write it that way. But usually a shorter source code is not necessarily a better program. Next question I use the 16f1827. It is an error; PR2 = 0x03ffh. The h at the end is no valid number. PR2 is a bye register and cannot hold values greater than 0xff. It is an error; CCP2SEL = 0. The name is APFCON0_CCP2SEL It is an error; TMR2ON = 1. The name is T2CON_TMR2ON Hope this helps. Have fun! Greets,Kiste -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/jallib. For more options, visit https://groups.google.com/d/optout.
