Hi Mike,
On 14/10/2020 16.24, 'Mike' via jallib wrote:
Just a note...The dimming ability of the display can be greatly
extended by using the SETPRECHARGE and SETVCOMDETECT commands. I am
able to make the display very dim - much dimmer than just using the
contrast - by setting all three parameters to zero. This could be
very useful for battery powered devices.
I'm using ssd1306 (and sh1106) in other environments (ESP8266/ESP32 with
Micropython, and Teensy 4.0 with C/C++). I am interested to extend some
of the oled support libraries for these environments for better
contrast-control. But the datasheets were not helpful (enough) for me.
Could you point me to more elaborate information w.r.t. the above
commands (meaning, explanation and format)?
Regards, RobH
--
*Rob H*amerling, Vianen, NL
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/jallib/cb530e23-1d0d-0750-3d78-91194e9a97db%40gmail.com.
