Hi RobH, I didn't find any documentation about these commands. I only found their usefulness through experimentation. I also see that the Arduino community has found this out as well.
Sorry that I couldn't be of more help. Regards, Mike On Saturday, October 17, 2020 at 8:29:59 AM UTC-4, Rob Hamerling wrote: > > > Hi Mike, > > On 14/10/2020 16.24, 'Mike' via jallib wrote: > > > Just a note...The dimming ability of the display can be greatly extended > by using the SETPRECHARGE and SETVCOMDETECT commands. I am able to make > the display very dim - much dimmer than just using the contrast - by > setting all three parameters to zero. This could be very useful for > battery powered devices. > > I'm using ssd1306 (and sh1106) in other environments (ESP8266/ESP32 with > Micropython, and Teensy 4.0 with C/C++). I am interested to extend some of > the oled support libraries for these environments for better > contrast-control. But the datasheets were not helpful (enough) for me. > Could you point me to more elaborate information w.r.t. the above commands > (meaning, explanation and format)? > > Regards, RobH > > > -- > *Rob H*amerling, Vianen, NL > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/48b8280c-f38f-45c9-9578-2658a9e5c680o%40googlegroups.com.
