Can I see the Bootloader section ? I may be able to advise on this subject.
We are making changes to TinyBootLoader to fully automate the production of the HEX so the user does not need to know ASM. And, I wonder which Bootloaders are in the book. :-) On Tuesday, 22 June 2021 at 15:16:40 UTC+1 [email protected] wrote: > Hi all, > > I read some pages of the - part of the - book that can be found on the > Elektor website. > > For JAL it points to the JAL download site and the examples are based on > Jallib version 1.5.0, that's what the book says. > > For the programmer it talks about the XWisp and the PicKit3. I would not > have mentioned the XWisp since it supports only a limited number of PICs. > The good thing is that he explains how to use the PicKit3 using the Pickit3 > software or the IPE software from MPLABX and how you can 'revert' the > Pickit3 to use either one of these packages. > > I will read the book and I will write down suggestions and comments for > Peter (e.g about not mentioning the XWisp), maybe handy for a re-print. I > expect - like software - that the book is not bug free 😊. > > Kind regards, > > Rob > > > > ------------------------------ > *Van:* 'Oliver Seitz' via jallib <[email protected]> > *Verzonden:* dinsdag 22 juni 2021 09:30 > *Aan:* 'Evan Venn' via jallib <[email protected]> > *Onderwerp:* Re: [jallib] New - Dutch - book on programming PIC > microcontrollers with JAL > > Oh! That is *very* good to know, thanks! Maybe I'll have to dump my ICD3, > as it doesn't support Qx0/Qx1/Qx3/Qx4 :-( > > Greets, > Kiste > > > > > Am Dienstag, 22. Juni 2021, 09:13:31 MESZ hat 'Evan Venn' via jallib < > [email protected]> Folgendes geschrieben: > > > > > > > The product is not available from Microchip – correct. > > But, Microchip Open Sourced PK2 in 2009 and PK3 in 2012. Which means > there are hardware developers selling PK2 and PK3. > > As of 2021 we were appointed as a Microchip Partner to provide PICKITPlus > software for the PK2 and PK3. > > PK2 and PK3 are not dead. Far from it. We are adding the Q83 and Q84 this > month. We have software for Windows, Linus, Pi. And, we have many software > options across these operating systems. > > 😊 > > Evan > > > Sent from Mail for Windows 10 > > From: 'Oliver Seitz' via jallib > Sent: 22 June 2021 07:31 > To: '[email protected]' via jallib > Subject: Re: [jallib] New - Dutch - book on programming PIC > microcontrollers with JAL > > Hi Evan, > > "Status: No Longer Available" says Microchip website about PICKit2 *and* > PICKit3. The book addresses people who never have used microcontrollers, > they presumably don't have any equipment already. I think it's ok not to > talk about the device peceeding the now-obsolete device. > > > Greets, > Kiste > > > Am Dienstag, 22. Juni 2021, 07:54:18 MESZ hat '[email protected]' > via jallib <[email protected]> Folgendes geschrieben: > > > > > > Interesting book. I do hope it sells. > > Has anyone read the book? What was said about PICKit3? and why is > PICKit2 missing? With PICKitPlus supporting most operating systems and > the Microchip PIC range I would like to see this in the book. > > Anyone got any insights? > > Evan > > On Tuesday, 22 June 2021 at 06:04:44 UTC+1 [email protected] wrote: > > > > > > > > > > The book is about getting started with programming microcontrollers > without having any prior knowledge about programming nor electronics and it > uses JAL as programming language. You can read part of the book on the > Elektor website. So it is different from most other books for which you > need to have some basic knowledge. > > > > > > > > > > I heard from Peter that an English version is depending on the sales of > the Dutch version. > > > > > > > > > > > > > > Met vriendelijke groet, > > > > Rob Jansen > > > > > > ________________________________ > > From: [email protected] <[email protected]> on behalf of > hans <[email protected]> > > Sent: Monday, June 21, 2021 9:57:43 PM > > To: jallib <[email protected]> > > Subject: Re: [jallib] New - Dutch - book on programming PIC > microcontrollers with JAL > > > > > > > > > > Have a look at this > > > > > > > > Op maandag 21 juni 2021 om 09:17:38 UTC+2 schreef Kiste: > > > > > >> Hi Rob, > >> > >> very interesting, I'm not sure if I'll buy it, it's quite pricy.. > Usually, I'm learning from datasheets, so I don't know if I would learn a > lot about PICs. But I would definitely improve my dutch reading abilities > ;-) > >> > >> Greets, > >> Kiste > >> > >> > >> > >> > >> Am Montag, 21. Juni 2021, 08:46:06 MESZ hat [email protected] < > [email protected]> Folgendes geschrieben: > >> > >> > >> > >> > >> > >> Hi all, > >> > >> This information is meant for people that are capable of reading Dutch. > >> > >> Peter Zwart recently wrote a Dutch book called (translated) > 'Programming Microcontrollers - Learn to program PIC-Microcontrollers with > JAL in 60 lessons'. > >> > >> If I understood Peter right, the book does not use custom made JAL > libraries like the other books on JAL written by Bert van Dam but uses JAL > as it is. > >> > >> So if you are interested or know somebody who wants to start with > programming PIC microcontrollers, you could buy this book (I will, since I > want to know what I do not yet know about PIC microcontrollers 😊) > >> See: Microcontrollers Programmeren, Peter Zwart | 9789053813072 | Boek > - bookspot.nl > >> > >> This book will help to improve the popularity of JAL and increase the > JAL community. > >> > >> Kind regards, > >> > >> Rob > >> > >> > >> > >> -- > >> You received this message because you are subscribed to the Google > Groups "jallib" group. > >> To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > >> To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/3f37bf5c-94f7-459c-b31e-b2e6a995a23dn%40googlegroups.com. > > > >> > >> > >> > > > > > > > > -- > > You received this message because you are subscribed to the Google > Groups "jallib" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/5d5e78e7-15bc-49cc-8053-c43fae2e91d0n%40googlegroups.com > . > > > > > > > > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > > https://groups.google.com/d/msgid/jallib/09255233-6527-46b2-ad79-e15fbf992558n%40googlegroups.com > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/786452631.1417760.1624343482740%40mail.yahoo.com > . > > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > > https://groups.google.com/d/msgid/jallib/809CB515-7B87-49E2-A461-599CE187523F%40hxcore.ol > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/40085738.21496.1624347047231%40mail.yahoo.com > . > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/6a20da4b-9c54-4a40-a6ed-ee346afede71n%40googlegroups.com.
