Hi Rob and others, I'm still using the Arduino app for the HC-05 (with the lib for the HC_06). I also found the lib for the HC-05 , and a video of it. Is there already a sample file and is there also a text available from the video? I have three HC-05's two I want to use as slaves and one as master. regards Hans
Op vrijdag 28 januari 2022 om 08:30:04 UTC+1 schreef hans: > Hi Sunish, > > Thank you for your response. I tried your app and used it to read the > arduino codes from the “Uno Servo control”app > > . I'm using this app now but as I said, in the used code is missing a > fixed start byte . I've also tried to follow the video of the program you > mentioned, but it's very hard for me to follow. Thanks anyway . > > Hans > > Op woensdag 26 januari 2022 om 07:15:47 UTC+1 schreef [email protected]: > >> I use B4A <https://www.b4x.com/b4a.html>for any kind of embedded Android >> App. I have also published a terminal app on playstore >> <https://play.google.com/store/apps/developer?id=Timers+n+Savers&hl=en_US&gl=US> >> >> built on B4a for wifi/bluetooth/USB to serial terminal control. >> Pretty good and now its free. >> >> Regards, >> Sunish >> >> On Thu, 20 Jan 2022 at 21:29, hans <[email protected]> wrote: >> >>> Hello all, >>> >>> Because I make quite a lot with servos, I have now used the HC-05. >>> >>> Of course thanks to the Bluetooth lib. >>> >>> To control the case I used an Arduino servo controller. This produces a >>> number in 2 bytes such as 1120, which means servo 1 to 120 degrees. The >>> bytes come through without a preceding start byte, which I find not very >>> elegant. >>> >>> I converted that 0 to 180 to 0 to 255 and with that I control the >>> servos via known servo lib. >>> >>> It works well, but my iPhone still shows the range from 0 to 180. >>> >>> Now I see some things made with MIT app inventor. Before I start racking >>> my old brain with this, I'd like to ask if anyone has already done >>> something with this. >>> >>> regards >>> >>> Hans >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "jallib" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/jallib/144eb8d0-1935-46a6-a113-9d483e3c240bn%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/jallib/144eb8d0-1935-46a6-a113-9d483e3c240bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/52b8ad07-8d98-4b76-932d-0c82603bd4cen%40googlegroups.com.
