Rob, You've made beautiful videos, unfortunately I'm having some vision problems and that's why I was hoping you had a text document of it. I can enlarge that step by step. regards Hans
Op zaterdag 9 april 2022 om 08:11:10 UTC+2 schreef [email protected]: > Hi Hans, > > You already found these video's? I did not add subtitle if you that is > what you where asking. > > https://youtu.be/dw29M2YqFR4 > <https://youtu.be/dw29M2YqFR4> > JAL library for the Bluetooth HC-06 module <https://youtu.be/dw29M2YqFR4> > This video will show the functionality of the JAL library for the > Bluetooth HC-06 module. Two applications will be demonstrated.The video is > not perfect but ... > youtu.be > > https://youtu.be/4X1y0ykpM14 > <https://youtu.be/4X1y0ykpM14> > JAL library for the Bluetooth HC-05 module <https://youtu.be/4X1y0ykpM14> > This video will show the functionality of the JAL library for the > Bluetooth HC-05 module connecting as a Bluetooth master to an HC-06 > Bluetooth slave device.... > youtu.be > Sample files are in the sample directory: > -) One for the HC-05: 16f15325_bluetooth_hc05_master.jal > -) Three for the > HC-06: 16f877a_bluetooth_hc06_slave.jal, 16f1823_bluetooth_hc06_slave.jal > and 16f15325_bluetooth_hc06_slave.jal > > I did not make a sample file for the hc05 as slave but you should be able > to use it in slave mode. > > Let me know if you ran into any issues. > > Kind regards, > > Rob > > > > > ------------------------------ > *Van:* [email protected] <[email protected]> namens hans < > [email protected]> > *Verzonden:* vrijdag 8 april 2022 22:07 > *Aan:* jallib <[email protected]> > *Onderwerp:* Re: [jallib] MIT app inventor > > Hi Rob and others, > I'm still using the Arduino app for the HC-05 (with the lib for the > HC_06). I also found the lib for the HC-05 , and a video of it. Is there > already a sample file and is there also a text available from the video? > I have three HC-05's two I want to use as slaves and one as master. > regards > Hans > > Op vrijdag 28 januari 2022 om 08:30:04 UTC+1 schreef hans: > > Hi Sunish, > > Thank you for your response. I tried your app and used it to read the > arduino codes from the “Uno Servo control”app > > . I'm using this app now but as I said, in the used code is missing a > fixed start byte . I've also tried to follow the video of the program you > mentioned, but it's very hard for me to follow. Thanks anyway . > > Hans > > Op woensdag 26 januari 2022 om 07:15:47 UTC+1 schreef [email protected]: > > I use B4A <https://www.b4x.com/b4a.html>for any kind of embedded Android > App. I have also published a terminal app on playstore > <https://play.google.com/store/apps/developer?id=Timers+n+Savers&hl=en_US&gl=US> > > built on B4a for wifi/bluetooth/USB to serial terminal control. > Pretty good and now its free. > > Regards, > Sunish > > On Thu, 20 Jan 2022 at 21:29, hans <[email protected]> wrote: > > Hello all, > > Because I make quite a lot with servos, I have now used the HC-05. > > Of course thanks to the Bluetooth lib. > > To control the case I used an Arduino servo controller. This produces a > number in 2 bytes such as 1120, which means servo 1 to 120 degrees. The > bytes come through without a preceding start byte, which I find not very > elegant. > > I converted that 0 to 180 to 0 to 255 and with that I control the servos > via known servo lib. > > It works well, but my iPhone still shows the range from 0 to 180. > > Now I see some things made with MIT app inventor. Before I start racking > my old brain with this, I'd like to ask if anyone has already done > something with this. > > regards > > Hans > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/144eb8d0-1935-46a6-a113-9d483e3c240bn%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/144eb8d0-1935-46a6-a113-9d483e3c240bn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/52b8ad07-8d98-4b76-932d-0c82603bd4cen%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/52b8ad07-8d98-4b76-932d-0c82603bd4cen%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/8cea8af6-5890-4c10-9158-fa6a2b8f5d11n%40googlegroups.com.
