Hi Vasile, my site www.tweeduuster.nl works fine. Sorry for the mistake What do you mean with reactive energy? I shows in and out Kwhr and save the data for some time.
Op woensdag 20 juli 2022 om 06:24:09 UTC+2 schreef vasile: > Hans, your site is down? > Does your meter measure reactive energy too? Thx. > > On Tue, Jul 19, 2022 at 8:48 PM hans <[email protected]> wrote: > >> Hi Rob, >> If you look at my site, www.teeduuster.nl, on the first page you will >> find SMART METER READER. This animal did fine until last week, but our >> energy supplier has placed another meter with something different. Hence. >> I'll see what I can do with your tips. thanks again. >> regards >> Hans >> Op dinsdag 19 juli 2022 om 18:42:33 UTC+2 schreef [email protected]: >> >>> Hi Hans, >>> >>> This seems to be a very old library completely written in assembly. >>> >>> I suggest you use the current library *pic_data_eeprom.jal* and replace >>> the following: >>> >>> - Program_EEprom_Read -->* data_eeprom_read_word * >>> - Program_EEprom --> *data_eeprom_word* >>> - Program_EEprom_Write --> *data_eeprom_write_word* >>> >>> You can use the same parameters in both procedures and functions. It >>> should then work again. >>> >>> But please check this library and read the note about the EEPROM offset >>> (EEPROM_ADDRESS_OFFSET) since some PICs need it and I do not know which one >>> you are using. >>> >>> Kind regards, >>> >>> Rob >>> >>> ------------------------------ >>> *Van:* [email protected] <[email protected]> namens hans < >>> [email protected]> >>> *Verzonden:* maandag 18 juli 2022 21:23 >>> *Aan:* jallib <[email protected]> >>> *Onderwerp:* Re: [jallib] Pic_program_eeprom >>> >>> I used the pic-data-eeprom and the the attached lib in a >>> years_old_still_working-program but the attached is not working anymore. I >>> got errors in compiling. >>> >>> Op maandag 18 juli 2022 om 18:48:43 UTC+2 schreef [email protected]: >>> >>> Hi Hans, >>> >>> Was your plan to program the eeprom separately or program eeprom from >>> your JAL program? >>> >>> You can program eeprom with a PICkit3 (and I assume also a Pickit2) and >>> for programming it from your JAL program you can use pic_data_eeprom.jal. >>> >>> Kind regards, >>> >>> Rob >>> >>> ------------------------------ >>> *Van:* [email protected] <[email protected]> namens hans < >>> [email protected]> >>> *Verzonden:* maandag 18 juli 2022 17:23 >>> *Aan:* jallib <[email protected]> >>> *Onderwerp:* [jallib] Pic_program_eeprom >>> >>> Hello, >>> For a very old program I used the lib pic_program_eeprom, does it still >>> exist somewhere? >>> greetings >>> Hans >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "jallib" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/jallib/29887325-b407-44e9-b6b1-b886f076ab3bn%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/jallib/29887325-b407-44e9-b6b1-b886f076ab3bn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "jallib" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/jallib/3b1192a6-c318-4916-aee8-48796ee17dacn%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/jallib/3b1192a6-c318-4916-aee8-48796ee17dacn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/d0a1275f-7e87-4cfd-a916-1e588b63f5cen%40googlegroups.com >> >> <https://groups.google.com/d/msgid/jallib/d0a1275f-7e87-4cfd-a916-1e588b63f5cen%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/9437eff2-56c6-44eb-a398-c168d5142fa9n%40googlegroups.com.
