Hi Hans, What is a K150?
I - almost - always use a PICKit3 for programming, sometime using the PICKit3 software and sometimes using the IPE software from MPLABX. When using the MPLABX it needs a different firmware and when switching back to the PICKit3 software it needs again the old firmware. My solution: I have 2 PICKit3 one for the PICKit3 software and on for the IPE MPLABX software. It was not intended that way but a long time ago something went wrong with my PICKit3 while it was download the programming software for a certain PIC. I then needed to re-program the PICKit3 itseld and for that .... you need a programmer. BTW. I added to use of the IPE MPLABX software for a PICKit3 to the Jallib Tutorial some time ago. The disadvantage is that this IPE software is very slow so it you can use the PICKit3 software stay with that. And if you want your PICKit2 to be able to program more PIC's you can follow the suggestions made earlier or go for Evan's PICKitplus software. Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens hans <[email protected]> Verzonden: zaterdag 23 juli 2022 10:26 Aan: jallib <[email protected]> Onderwerp: Re: [jallib] Wisp648 Hi Rob, I always use the PICKIT separately but I got questions about it. Does the K150 say anything? I've tried to get it to work but there's always a problem with the driver. regards Hans Op zaterdag 23 juli 2022 om 10:13:57 UTC+2 schreef [email protected]: Hi Hans, The PICKit2 (and I assume the PICkit3) software has a command line interface so it may be possible to control that from JALEdit but I never used it. Maybe there are people on this forum that have used it like this and can share how to do that. Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens hans <[email protected]> Verzonden: zaterdag 23 juli 2022 08:29 Aan: jallib <[email protected]> Onderwerp: [jallib] Wisp648 Hello, So far I have worked with the wisp648 whenever possible. The Wisp648 has the huge advantage for me that it can be controlled directly from the Jal editor. I wonder if there are more that can work like this. regards Hans -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/41ba2393-fd95-4689-bf25-48218b41cab6n%40googlegroups.com<https://groups.google.com/d/msgid/jallib/41ba2393-fd95-4689-bf25-48218b41cab6n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/5834c3b7-9bd8-44d6-af80-a82c241916den%40googlegroups.com<https://groups.google.com/d/msgid/jallib/5834c3b7-9bd8-44d6-af80-a82c241916den%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/GVXP195MB163787A376A690EDD4B0CD4FE6929%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM.
