Have tested if it works from mplab as i have done until now : (start mplab, load hex file and program,) works perfect
Op donderdag 28 juli 2022 om 15:50:34 UTC+2 schreef hans: > Tested from jaledit , it opened the batch and teh same eror message : > C:\Users\Gebruiker\Desktop>"C:\Program > Files\Microchip\MPLABX\v5.45\mplab_platform\mplab_ipe\pk3cmd.exe" -TPPK3 > -Pport -MPIC -Fcom5 -OL > > Illegal command line parameter T > Press any key to continue . . . > > Op donderdag 28 juli 2022 om 13:12:20 UTC+2 schreef vasile: > >> "Gefeliciteerd" >> seems ok for me. :) >> >> BTW, if you use pickit4, you will need anyway to install the IPE to >> change the supply voltage, then to plug and unplug and plug again the >> pickit until IPE sees it...then fortunately to program something. Never >> leave it in the USB when you start the computer if you do not want to send >> it to Microchip irish office for reflashing the Atmel inside or exchanging >> with a new one... Pickit4 needs to behave with it as you'll do with eggs. >> On the opposite of Pickit2/3 which can be reflashed at home... >> best wishes >> >> >> On Thu, Jul 28, 2022 at 8:56 AM hans <[email protected]> wrote: >> >>> Hi Sunish, >>> I have made my first batch: >>> >>> @ECHO OFF >>> Echo Gefeliciteerd >>> PAUSE >>> >>> "C:\Program >>> Files\Microchip\MPLABX\v5.45\mplab_platform\mplab_ipe\pk3cmd.exe" -TPPK3 >>> -P%1 -MPIC -F%2 -OL >>> @if ERRORLEVEL 1 pause >>> >>> It works but gives an error message ; >>> >>> Gefeliciteerd >>> Press any key to continue . . . >>> Illegal command line parameter T >>> Press any key to continue . . . >>> Op woensdag 27 juli 2022 om 17:16:30 UTC+2 schreef hans: >>> >>>> Hi Sunish, >>>> This sounds great ! I have never made a batch file and use the Pickit >>>> not for providing 5 Volt\ >>>> The IPE is in the regular program file, not in (86), i have foud the >>>> same files you mentioned. >>>> . Please give me an example how to make the batch file. >>>> Thanks >>>> Hans >>>> >>>> Op woensdag 27 juli 2022 om 14:24:59 UTC+2 schreef [email protected]: >>>> >>>>> Jaledit can program using Pickit 2 and 3. You will need to install >>>>> IPE. >>>>> >>>>> Create a batch file and paste the code - Change the path to reflect >>>>> your computer's IPE installation >>>>> >>>>> *"C:\Program Files >>>>> (x86)\Microchip\MPLABX\v5.20\mplab_platform\mplab_ipe\pk3cmd.exe" -TPPK3 >>>>> -P%1 -MPIC -F%2 -OL* >>>>> *@if ERRORLEVEL 1 pause* >>>>> >>>>> >>>>> In jaledit you will have to set the path to the batch file and pass %D >>>>> %F for the PIC name and file name respectively. >>>>> the /V5 is to force Pickit to provide 5V supply >>>>> >>>>> [image: image.png] >>>>> >>>>> >>>>> >>>>> Regards, >>>>> Sunish >>>>> >>>> -- >>> >> You received this message because you are subscribed to the Google Groups >>> "jallib" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/jallib/f295ac0d-880c-48b4-a78d-18fc674db5cdn%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/jallib/f295ac0d-880c-48b4-a78d-18fc674db5cdn%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/0a9783db-3aca-4c6c-8d85-128ffc9589c6n%40googlegroups.com.
