Hello Rob, Thank you very much. This will help alot. Cheers.
FS On Friday, December 2, 2022 at 7:21:46 PM UTC [email protected] wrote: > Hi Filipe, > > One correction. if you get a timeout then there is no string (or only a > partial string) so you have to check if the timer has reached the timeout > after the repeat. > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens Rob CJ < > [email protected]> > *Verzonden:* vrijdag 2 december 2022 20:20 > *Aan:* [email protected] <[email protected]> > > *Onderwerp:* Re: [jallib] Re: Variable Table Append > Hi Filipe, > > Some sample code. I did not test it (or compiled it) but I assume you get > the idea. > > const word MAX_TIMEOUT = 20_000 > const byte MAX_BUFFER = 20 > const byte CR = 0x0D > const byte LF = 0x0A > > var word timer = 0 > var byte my_buffer[MAX_BUFFER] > var byte index = 0 > var byte character = 0 > > -- Read a string. > repeat > if serial_hw_data_available() then > character = serial_hw_data > my_buffer[index] = character > index = index + 1 > end if > timer = timer + 1 > _usec_delay(100) > until (index == MAX_BUFFER) | (character == CR) | (character == LF) | > (timer == MAX_TIMEOUT) > > The string is then in my_buffer (including a CR or LF). > > Kind regards, > > Rob > > > ------------------------------ > *Van:* [email protected] <[email protected]> namens flyway38 < > [email protected]> > *Verzonden:* vrijdag 2 december 2022 19:23 > *Aan:* jallib <[email protected]> > *Onderwerp:* Re: [jallib] Re: Variable Table Append > > Hi Rob, > > Thanks for your input. > Could you post some sample code please? > I think am missing some important details... > How can I define a variable buffer? > Because this seems not work: var byte received[]=""... > > Am also struggling to read my modems relies to AT commands... > It seems my code is working correctly and after sending the AT command, > the readings from serial port seems to point to characters from the sent > command... > Getting crazy here while in battle with the code... :D > Thank you very much. > > Best regards, > Filipe Santos > > On Friday, December 2, 2022 at 6:06:56 PM UTC [email protected] wrote: > > Hi Filipe, > > You just read the data from a serial port, add that to your local variable > buffer, increment an index pointer with each received character and read > until you receive either a Carriage Return or a Line Feed (one of the will > do). I normally also add a timeout to the read function so that it does not > hang when nothing is received. > > Kind regards, > > rob > > > > ------------------------------ > *Van:* [email protected] <[email protected]> namens flyway38 < > [email protected]> > *Verzonden:* vrijdag 2 december 2022 12:38 > *Aan:* jallib <[email protected]> > *Onderwerp:* [jallib] Re: Variable Table Append > > Am trying to mimic a "Read_String" from serial port. > Any ideas? > > Thank you. > > Regards, > FS > > On Friday, December 2, 2022 at 9:42:34 AM UTC flyway38 wrote: > > Hello all, > > Have searched for it but haven't found anything useful. > Need to know a good way of appending a variable table. > Starting from a MyVar[] = "", then just append data to it... > Also what happen to website: https://justanotherlanguage.org/ ? > Cannot connect to that website. > Thank you very much. > > Kind regards, > Filipe Santos. > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/2251b524-7658-42f7-970b-a6817d6709e1n%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/2251b524-7658-42f7-970b-a6817d6709e1n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/37733abd-20ed-4130-8aa2-03381fb3ac1an%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/37733abd-20ed-4130-8aa2-03381fb3ac1an%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/GVXP195MB16374C5EDB5CFD44C5580F26E6179%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM > > <https://groups.google.com/d/msgid/jallib/GVXP195MB16374C5EDB5CFD44C5580F26E6179%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/1af55b5d-54bb-4ea7-a2d6-21574ba3ea7an%40googlegroups.com.
