Hi Rob,
Thank you for that info.
The OK answer from the modem, am already getting, but using "like brute
force" serial readings...
function CheckComms_OK() return bit is
timer = 0
Received[0] = "X"
Received[1] = "X"
--
while (Received[0]!="O" | Received[1]!="K") & timer < 60_000 loop
fReturn = serial_hw_read(char)
Received[0] = char
fReturn = serial_hw_read(char)
Received[1] = char
--
timer = timer + 1
end loop
--
fReturn = FALSE
--
if (Received[0]=="O" & Received[1]=="K") then
return TRUE
else
return FALSE
end if
end function
But other answers from the modem are still a no go.
Example: "+CMGS" from an AT+CMGS="phone nr"....
Will need this because will need to also receive SMS with this PIC.
Will check that LIB you mentioned.
Thank you.
Cheers,
FS
On Saturday, December 3, 2022 at 1:43:23 PM UTC [email protected] wrote:
> Hi Filipe, Vasile,
>
> I would recommend using the serial libraries that work on an interrupt
> basis like serial_hw_int_cts.jal. Using this library with a big enough
> buffer will prevent that you miss any characters.
>
> I used this - using AT commands - in the libraries bluetooth_hc05.jal and
> bluetooth_hc06.jal as to be able to check if an OK was received after an AT
> command.
>
> Kind regards,
>
> Rob
>
>
>
> ------------------------------
> *Van:* [email protected] <[email protected]> namens vsurducan
> <[email protected]>
> *Verzonden:* zaterdag 3 december 2022 11:09
>
> *Aan:* [email protected] <[email protected]>
> *Onderwerp:* Re: [jallib] Re: Variable Table Append
> Oh, understood. Reading needs to have priority. Use interrupts then...or
> avoid using any delays in your actual code.
> A sms has not an instant execution ( most of the time). So using low speed
> transmission/reception it might be a working solution.
>
> On Sat, Dec 3, 2022 at 11:53 AM flyway38 <[email protected]> wrote:
>
> Hello Vasile,
>
> Am not using serial lib with interrupts.
> Maybe I need to use that lib.
> Current problem is GSM modem seems to acknowledge (ex: "OK") faster than
> my code can read it...
> A simple "AT" seems to get the "OK" faster than I can read.
> And I want to get all acknowledges... to not step to next AT command
> before having sure of "OK" response from the modem.
> All my AT commands to send an SMS are working ok, if no checking for the
> acknowledges...
> Big battle here under going. :D
> Thank you for your input.
>
> Cheers,
> FS
>
> On Saturday, December 3, 2022 at 6:18:47 AM UTC vasile wrote:
>
> Fellipe, I'm curious if this will work fo you. I was never able to use the
> serial library (interrupts) as is without a slip of one char in received
> characters order. I've counted chars to solvethe problem....
> Depending on your GSM transciever, some delays may be needed between chars
> and some longer delays between AT commands and chars.
>
> On Fri 2 Dec 2022, 9:25 PM flyway38 <[email protected] wrote:
>
> Hello Rob,
>
> Thank you very much.
> This will help alot.
> Cheers.
>
> FS
>
> On Friday, December 2, 2022 at 7:21:46 PM UTC [email protected] wrote:
>
> Hi Filipe,
>
> One correction. if you get a timeout then there is no string (or only a
> partial string) so you have to check if the timer has reached the timeout
> after the repeat.
>
> Kind regards,
>
> Rob
>
> ------------------------------
> *Van:* [email protected] <[email protected]> namens Rob CJ <
> [email protected]>
> *Verzonden:* vrijdag 2 december 2022 20:20
> *Aan:* [email protected] <[email protected]>
>
> *Onderwerp:* Re: [jallib] Re: Variable Table Append
> Hi Filipe,
>
> Some sample code. I did not test it (or compiled it) but I assume you get
> the idea.
>
> const word MAX_TIMEOUT = 20_000
> const byte MAX_BUFFER = 20
> const byte CR = 0x0D
> const byte LF = 0x0A
>
> var word timer = 0
> var byte my_buffer[MAX_BUFFER]
> var byte index = 0
> var byte character = 0
>
> -- Read a string.
> repeat
> if serial_hw_data_available() then
> character = serial_hw_data
> my_buffer[index] = character
> index = index + 1
> end if
> timer = timer + 1
> _usec_delay(100)
> until (index == MAX_BUFFER) | (character == CR) | (character == LF) |
> (timer == MAX_TIMEOUT)
>
> The string is then in my_buffer (including a CR or LF).
>
> Kind regards,
>
> Rob
>
>
> ------------------------------
> *Van:* [email protected] <[email protected]> namens flyway38 <
> [email protected]>
> *Verzonden:* vrijdag 2 december 2022 19:23
> *Aan:* jallib <[email protected]>
> *Onderwerp:* Re: [jallib] Re: Variable Table Append
>
> Hi Rob,
>
> Thanks for your input.
> Could you post some sample code please?
> I think am missing some important details...
> How can I define a variable buffer?
> Because this seems not work: var byte received[]=""...
>
> Am also struggling to read my modems relies to AT commands...
> It seems my code is working correctly and after sending the AT command,
> the readings from serial port seems to point to characters from the sent
> command...
> Getting crazy here while in battle with the code... :D
> Thank you very much.
>
> Best regards,
> Filipe Santos
>
> On Friday, December 2, 2022 at 6:06:56 PM UTC [email protected] wrote:
>
> Hi Filipe,
>
> You just read the data from a serial port, add that to your local variable
> buffer, increment an index pointer with each received character and read
> until you receive either a Carriage Return or a Line Feed (one of the will
> do). I normally also add a timeout to the read function so that it does not
> hang when nothing is received.
>
> Kind regards,
>
> rob
>
>
>
> ------------------------------
> *Van:* [email protected] <[email protected]> namens flyway38 <
> [email protected]>
> *Verzonden:* vrijdag 2 december 2022 12:38
> *Aan:* jallib <[email protected]>
> *Onderwerp:* [jallib] Re: Variable Table Append
>
> Am trying to mimic a "Read_String" from serial port.
> Any ideas?
>
> Thank you.
>
> Regards,
> FS
>
> On Friday, December 2, 2022 at 9:42:34 AM UTC flyway38 wrote:
>
> Hello all,
>
> Have searched for it but haven't found anything useful.
> Need to know a good way of appending a variable table.
> Starting from a MyVar[] = "", then just append data to it...
> Also what happen to website: https://justanotherlanguage.org/ ?
> Cannot connect to that website.
> Thank you very much.
>
> Kind regards,
> Filipe Santos.
>
> --
> You received this message because you are subscribed to the Google Groups
> "jallib" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/jallib/2251b524-7658-42f7-970b-a6817d6709e1n%40googlegroups.com
>
> <https://groups.google.com/d/msgid/jallib/2251b524-7658-42f7-970b-a6817d6709e1n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "jallib" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/jallib/37733abd-20ed-4130-8aa2-03381fb3ac1an%40googlegroups.com
>
> <https://groups.google.com/d/msgid/jallib/37733abd-20ed-4130-8aa2-03381fb3ac1an%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "jallib" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/jallib/GVXP195MB16374C5EDB5CFD44C5580F26E6179%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM
>
> <https://groups.google.com/d/msgid/jallib/GVXP195MB16374C5EDB5CFD44C5580F26E6179%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "jallib" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
>
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/jallib/1af55b5d-54bb-4ea7-a2d6-21574ba3ea7an%40googlegroups.com
>
> <https://groups.google.com/d/msgid/jallib/1af55b5d-54bb-4ea7-a2d6-21574ba3ea7an%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "jallib" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/jallib/bfa9ccd1-54c6-47d1-9535-8272eb0cca90n%40googlegroups.com
>
> <https://groups.google.com/d/msgid/jallib/bfa9ccd1-54c6-47d1-9535-8272eb0cca90n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "jallib" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/jallib/CAM%2Bj4qsrRDXRbaHZi8f3zPGVVje5YzHQn1yzXzQvLBE5NxD5_w%40mail.gmail.com
>
> <https://groups.google.com/d/msgid/jallib/CAM%2Bj4qsrRDXRbaHZi8f3zPGVVje5YzHQn1yzXzQvLBE5NxD5_w%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/jallib/6748d6c6-d1a3-4f0c-82ea-baf9410375d0n%40googlegroups.com.
