Hello Bob, I think you didn't understand me, sorry. All references are in the tools as you indicated. EXAMPLE: 1. I have done some things in Bert's package where all references to this package are in the tools. 2. I close the case and open another Jal package (e.g. the latest version). All references are listed there as well. 3. When I then use the OPEN button, I get to see the list of files from Bert's package.
Op zondag 18 december 2022 om 09:58:49 UTC+1 schreef [email protected]: > Hi Hans, > > If you install a new bee package then it should carry the same name as > your previous Jallib directory. This because JALEdit will always point to > the name of that directory and searches for the libs there. > > In the tools --> Environment options window of JALEdit you find something > like this (directory names will be different on your machine): > > > > So if you download a bee-package and put it in a name with a different > directory, JALEdit will still use the older Jallib version. > > This is what I do: > > 1. Download the bee-package to the download folder of Windows > 2. Extract the zip file with the destination directory Jallib > 3. Delete C:\Jallib > 4. Move Jallib from the download folder to C:\Jallib > > You then always have the most recent libraries and compiler version. > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens hans < > [email protected]> > *Verzonden:* zondag 18 december 2022 08:46 > > *Aan:* jallib <[email protected]> > *Onderwerp:* Re: [jallib] USB_help > > Hi Vasile, > > Your message has made me think and it brings me to a phenomenon that I > have paid little attention to until now. > > I'll try to explain. > > 1. I have several complete JAL packages on my PC. If a newer version is > available I will keep the old one. Including the complete package from > Bert's book because I have made a lot of things with it. > > 2. When I start something new I create a new folder, put a copy from the > sample list in it and only if I change something from the lib list do I put > that in there too. > > 3. Here's the thing: For example, if I want to view and edit something in > an older Jal package and I click the OPEN function, Jaledit shows me the > file map I've been working on recently. > > 4. If I then go to another package and do the same there, it shows the > list of recent files from the other package. > > 5. So somewhere there must be a link between all those packages. So it > could very well be that jaledit is using the wrong link > > 6. I will change my method and put everything in one folder as you > indicated. > > > > I hope you understand my story. > > regards > > Hans > > Op zondag 18 december 2022 om 07:20:46 UTC+1 schreef vasile: > > I never experienced this problem, so I'm useless for LVP/USB interaction. > What I know for sure is this: once USB works for you, save in a separate > folder ALL libraries related to your test program and the compiler, test > carefully that compilation works only from that folder and write a note > named maybe "warning.jal" describing clearly what was the issue and how you > solved it. In this particular way you will never encounter a similar issue > using the same compiler revision. > Of course you will see other issues...:) > > On Sat, Dec 17, 2022 at 8:59 PM hans <[email protected]> wrote: > > Another addition Vasile, I also tested with the pickitminus, but the case > does not work with or without the LVP. > I'm now looking for a cure for programming headaches. > Maybe I'd better go back to the antique things that I've been able to > experience so much for years. > regards > Hans > > Op zaterdag 17 december 2022 om 18:33:20 UTC+1 schreef hans: > > Hi Vasile, > I have now discovered that if I turn off the LVP all examples work. > Apparently, activating the lvp causes both the Wisp and Pickit3 to interact > with it, causing this problem. > I'm going to always turn off the LVP from now on (if I don't forget!!) > Greetings and thanks again for all your responses. > Hans > > Op zaterdag 17 december 2022 om 17:39:22 UTC+1 schreef vasile: > > Hmm, let me find an 18F2550 and check. > > On Fri, Dec 16, 2022 at 7:52 PM hans <[email protected]> wrote: > > Hello Vasile > I have always worked as you indicated. Program, unplug everything and then > plug it back in. prompt response that the case was not recognized. See my > previous message. > Now your latest version, does nothing at all. Loaded the previous version > again and it works as stated before. > regards > Hans > > Op vrijdag 16 december 2022 om 18:07:52 UTC+1 schreef vasile: > > Hans, > I think you are doing in this way: > 1. USB connection is kept permanently between your board and PC > 2. your board is programmed with pickit and after programming you expect > to see immediately the pic USB device in your PC > right? > > After programming you have to disconnect your PC from USB and connect it > again, wait a bit until the computer sees your device. > I think the original sample will work in this way, however below is the > the sample (using interrupts) which should work without disconnecting your > PIC from USB after programming ( please note I did not tested, no > PIC18F4450 or PIC2550 available now). > > Finally you may comment the 5s delay if you wish, but you may loss the " > JALLIB USB Serial Demo" string. > Hopefully will work for you. > > -- --------------------------------------- > include 18f4550 > > > -- even though the external crystal is 20 MHz, the configuration is such > that > -- the CPU clock is derived from the 96 Mhz PLL clock (div2), therefore set > -- target frequency to 48 MHz > pragma target clock 48_000_000 > > > -- fuses > pragma target PLLDIV P5 -- divide by 5 - 20MHZ_INPUT > pragma target CPUDIV P1 -- [primary oscillator src: /1][96 > mhz pll src: /2] > pragma target USBDIV P2 -- CLOCK_SRC_FROM_96MHZ_PLL_2 > pragma target OSC HS_PLL > pragma target FCMEN DISABLED > pragma target IESO DISABLED > pragma target PWRTE DISABLED -- power up timer > pragma target VREGEN ENABLED -- USB voltage regulator > pragma target VOLTAGE V21 -- brown out voltage > > pragma target BROWNOUT DISABLED -- no brownout detection > pragma target WDTPS P32K -- watch dog saler setting > pragma target WDT CONTROL -- watchdog software controlled > pragma target CCP2MUX pin_C1 -- CCP2 on pin C1 > pragma target PBADEN DIGITAL -- digital input port<0..4> > pragma target LPT1OSC LOW_POWER -- low power timer 1 > pragma target MCLR EXTERNAL -- master reset on RE3 > pragma target STVR DISABLED -- reset on stack over/under flow > pragma target LVP ENABLED -- allow low-voltage programming > > pragma target XINST DISABLED -- extended instruction set > pragma target DEBUG DISABLED -- background debugging > pragma target CP0 DISABLED -- code block 0 not protected > pragma target CP1 DISABLED -- code block 1 not protected > pragma target CP2 DISABLED -- code block 2 not protected > pragma target CP3 DISABLED -- code block 3 not protected > pragma target CPB DISABLED -- bootblock code not write > protected > pragma target CPD DISABLED -- eeprom code not write protected > pragma target WRT0 DISABLED -- table writeblock 0 not protected > pragma target WRT1 DISABLED -- table write block 1 not > protected > pragma target WRT2 DISABLED -- table write block 2 not > protected > pragma target WRT3 DISABLED -- table write block 3 not > protected > pragma target WRTB DISABLED -- bootblock not write protected > pragma target WRTD DISABLED -- eeprom not write protected > pragma target WRTC DISABLED -- config not write protected > pragma target EBTR0 DISABLED -- table read block 0 not protected > pragma target EBTR1 DISABLED -- table read block 1 not protected > pragma target EBTR2 DISABLED -- table read block 2 not protected > pragma target EBTR3 DISABLED -- table read block 3 not protected > pragma target EBTRB DISABLED -- boot block not protected > > WDTCON_SWDTEN = OFF -- disable watchdog > > const USB_INTERRUPT_DRIVEN = TRUE > include delay > include usb_serial > include print > > > -- constants > const byte str_welcome[] = "JALLIB USB Serial Demo app\n" > > -- variables > > -- interrupts? No thanks > -- INTCON_GIE = false > > > -- setup the USB serial library > usb_serial_init() > > var bit has_shown_welcome_msg = true > var byte ch > > delay_1s (5) > > -- main loop > forever loop > > if !defined(USB_INTERRUPT_DRIVEN) then > -- When the interrupt mode is not used we need to poll the usb ISR > function > -- on a regular base, in order to serve the USB requests otherwise > -- this call can be removed. > usb_serial_flush() > end if > > -- check if USB device has been configured by the HOST > if ( usb_cdc_line_status() != 0x00 ) then > if !has_shown_welcome_msg then > has_shown_welcome_msg = true > print_string( usb_serial_data, str_welcome ) > end if > else > has_shown_welcome_msg = false > end if > > -- check for input character > if usb_serial_read( ch ) then > -- echo input character > usb_serial_data = ch > end if > > end loop > -- ------------------------------------------------------- > > > > On Fri, Dec 16, 2022 at 6:06 PM hans <[email protected]> wrote: > > Hi Vasile, > With this the connection is accepted. i see a new com port and on a > terminal a bunch of values. > I have to disconnect the Pickit. > Can you complete this with the example in the sample ? > great > Hans > > Op vrijdag 16 december 2022 om 15:46:26 UTC+1 schreef vasile: > > Hi Hans, > could you test the following code? Just change the include PIC18F2550 with > PIC18F4550 > > -- ------------------------------------------------- > include 18f2550 > > -- even though the external crystal is 20 MHz, the configuration is such > that > -- the CPU clock is derived from the 96 Mhz PLL clock (div2), therefore set > -- target frequency to 48 MHz > pragma target clock 48_000_000 > > > -- fuses > pragma target PLLDIV P5 -- divide by 5 - 20MHZ_INPUT > pragma target CPUDIV P1 -- [primary oscillator src: /1][96 > mhz pll src: /2] > pragma target USBDIV P2 -- CLOCK_SRC_FROM_96MHZ_PLL_2 > pragma target OSC HS_PLL > pragma target FCMEN DISABLED > pragma target IESO DISABLED > pragma target PWRTE DISABLED -- power up timer > pragma target VREGEN ENABLED -- USB voltage regulator > pragma target VOLTAGE V43 -- brown out voltage > pragma target BROWNOUT DISABLED -- no brownout detection > pragma target WDTPS P32K -- watch dog saler setting > pragma target WDT CONTROL -- watchdog software controlled > pragma target CCP2MUX pin_C1 -- CCP2 on pin C1 > pragma target PBADEN DIGITAL -- digital input port<0..4> > pragma target LPT1OSC LOW_POWER -- low power timer 1 > pragma target MCLR EXTERNAL -- master reset on RE3 > pragma target STVR DISABLED -- reset on stack over/under flow > pragma target LVP DISABLED -- allow low-voltage programming > pragma target XINST DISABLED -- extended instruction set > pragma target DEBUG DISABLED -- background debugging > pragma target CP0 DISABLED -- code block 0 not protected > pragma target CP1 DISABLED -- code block 1 not protected > pragma target CP2 DISABLED -- code block 2 not protected > pragma target CP3 DISABLED -- code block 3 not protected > pragma target CPB DISABLED -- bootblock code not write > protected > pragma target CPD DISABLED -- eeprom code not write protected > pragma target WRT0 DISABLED -- table writeblock 0 not protected > pragma target WRT1 DISABLED -- table write block 1 not > protected > pragma target WRT2 DISABLED -- table write block 2 not > protected > pragma target WRT3 DISABLED -- table write block 3 not > protected > pragma target WRTB DISABLED -- bootblock not write protected > pragma target WRTD DISABLED -- eeprom not write protected > pragma target WRTC DISABLED -- config not write protected > pragma target EBTR0 DISABLED -- table read block 0 not protected > pragma target EBTR1 DISABLED -- table read block 1 not protected > pragma target EBTR2 DISABLED -- table read block 2 not protected > pragma target EBTR3 DISABLED -- table read block 3 not protected > pragma target EBTRB DISABLED -- boot block not protected > > WDTCON_SWDTEN = OFF -- disable watchdog > > const USB_INTERRUPT_DRIVEN = TRUE > include usb_serial > include print > include delay > > -- constants > ; const byte str_welcome[] = "JALLIB USB Serial Demo app\n" > > -- setup the USB serial library > usb_serial_init() > > -- variables > var bit has_shown_welcome_msg = true > var byte ch > var dword counter_dw = 0xFFFF_FFFF > var byte counter_b = 0 > var word timer = 0 > > delay_1s (5) > > -- main loop > forever loop > > if !defined(USB_INTERRUPT_DRIVEN) then > -- When the interrupt mode is not used we need to poll the usb ISR > function > -- on a regular base, in order to serve the USB requests otherwise > -- this call can be removed. > usb_serial_flush() > end if > > > > ; timer = timer + 1 > ; if timer == 500 then > ; timer = 0 > > ; print_byte_dec (usb_serial_data, counter_b) > ; _usec_delay( 1 ) > ; usb_serial_data = " " > print_dword_dec( usb_serial_data, counter_dw ) > ; _usec_delay( 1 ) > print_crlf(usb_serial_data) > ; counter_dw = counter_dw + 1 > ; counter_b = counter_b + 1 > ; end if > ; _usec_delay( 1 ) > > end loop > > On Fri, Dec 16, 2022 at 3:20 PM hans <[email protected]> wrote: > > Hey , > I have now received the 18F4550 and the 16F1455 and have tried both with > the usb_serial samples. programming with PicKit_3, but in all cases I get a > warning on my PC (both on win10 and win7) that the USB is not recognized. > The Vusb with capacitor reads 3.3 volts and I have programmed both with and > without LVP. identical to my previous attempts. > Apparently USB is not allowed to me > Hans > > Op woensdag 14 december 2022 om 14:19:16 UTC+1 schreef [email protected]: > > Hi Matt > > I see your question 10-12 now: Wednesday 14-12 > > I am not at home for 2 days. > > I can test. You hear as soon as possible. > > > > Regards > > Peter > > > > *Van:* [email protected] [mailto:[email protected]] *Namens > *Matthew > Schinkel > *Verzonden:* zondag 11 december 2022 04:18 > *Aan:* jallib <[email protected]> > *Onderwerp:* Re: [jallib] USB_help > > > > Hi Hans, what chip is it working on? > > > > Is anyone else able to test the 18f4455 blink usb sample? > > On Saturday, December 10, 2022 at 1:18:39 PM UTC-5 hans wrote: > > Hello, I tested the sample 18f4455 Blink_hs_usb.jal. This one didn't work. > Then I restarted Bert van Dam's old business and tried the same program on > it. that works as it should.!!!! > I have also tested ports D+ and D- (24 and 23) as inputs and those ports > work as well. I now doubt whether the PIC is broken or something else is > going on. > regards > Hans > > Op zaterdag 10 december 2022 om 10:30:14 UTC+1 schreef hans: > > Hello champs, > I have reassembled everything and I can only conclude that the PIC itself > (has done some things before) is defective. Unfortunately, I no longer have > a PIC with USB, so I put it back in the fridge. I will have to look for > another one but the market is scarce. > Thanks again for your great responses. > regards > Hans > > Op zaterdag 10 december 2022 om 06:18:17 UTC+1 schreef vasile: > > Yep. Matt has right. > > 1.The clock speed is esential. > > 2. You will notice quite a long delay (5s or so) between plugging the pic > usb and the moment when OS recognize it on pc. This depends by your > computer speed and pic firmware contents. If pic clk is wrong, you will not > see any usb device. After it appears, check on printer/pheripheral for your > device but watch for any warnings there.... > > On Sat 10 Dec 2022, 4:59 AM Matthew Schinkel <[email protected] wrote: > > Also use the code in 18f455_blink_hs_usb.jal > > > > You are missing this one: > > OSCCON_SCS = 0 -- select primary oscillator > > On Friday, December 9, 2022 at 9:54:43 PM UTC-5 Matthew Schinkel wrote: > > Hi Hans, > > > > There must be an issue with your circuit. Do you have the correct clock > speed? Make sure a blink sample and normal serial port is working. Try > another PC. Windows should pick it up. > > > > Matt. > > On Friday, December 9, 2022 at 3:12:12 PM UTC-5 hans wrote: > > Hello, > Thank you. I did what you recommended. Last Bee and tip from Vasile. Same > message from windows, not recognized and causing a malfunction. Pffffff/ > regards > Hans > > Op vrijdag 9 december 2022 om 18:43:24 UTC+1 schreef [email protected]: > > Hi Hans, > > > > As Vasile already mentioned Windows 10 will detect your device as a serial > (COM) port without the need of installing a separate driver. > > > > Make sure you have the USB connections right. The signals are not crossed > like for USART, so D+ to D+ and D- to D-. > > > > I attached a schematic diagram based on the PIC16F1455 for your > information and the USB connectors and what the signals look like. > > > > Good luck! > > > > Kind regards, > > > Rob > > > ------------------------------ > > *Van:* [email protected] <[email protected]> namens vsurducan > <[email protected]> > *Verzonden:* vrijdag 9 december 2022 18:12 > *Aan:* [email protected] <[email protected]> > *Onderwerp:* Re: [jallib] USB_help > > > > Hi Hans, > > for win10 you do not need any special driver, just a good terminal like > Teraterm. > > Download the last jal package, Rob did some modifications on USB driver, > > my suggestion is to use const USB_INTERRUPT_DRIVEN = TRUE > > The maximum speed is about 100kbps. > > > > > > > > On Fri, Dec 9, 2022 at 5:42 PM hans <[email protected]> wrote: > > Hello, > I am trying to learn more about USB and have tried a sample program( ex > 18F2450) (see attachment) I keep getting the remark that windows 10 does > not recognize the connection and cannot install the driver. What am I doing > wrong?? > regards > Hans > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/c92e6cb2-a584-4b1b-a77f-d8bf943560b2n%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/c92e6cb2-a584-4b1b-a77f-d8bf943560b2n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/CAM%2Bj4quO70sp3CP%2BezE5_6jDU%2BpsJ2D7-MAU9bzRm1U1RbmACA%40mail.gmail.com > > <https://groups.google.com/d/msgid/jallib/CAM%2Bj4quO70sp3CP%2BezE5_6jDU%2BpsJ2D7-MAU9bzRm1U1RbmACA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/df1d95ac-2ed5-46e2-80c6-47021bf19395n%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/df1d95ac-2ed5-46e2-80c6-47021bf19395n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/1c3098ea-5a51-4e41-a148-9782036d4b34n%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/1c3098ea-5a51-4e41-a148-9782036d4b34n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/4a8e384e-f796-4b51-b9ea-ab93e2336a96n%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/4a8e384e-f796-4b51-b9ea-ab93e2336a96n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/4c0c588f-12b8-47cb-a9c3-e8f21dd63f9an%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/4c0c588f-12b8-47cb-a9c3-e8f21dd63f9an%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/7ae2a91b-f74b-43f5-b14a-247a8d6afa20n%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/7ae2a91b-f74b-43f5-b14a-247a8d6afa20n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/62213503-a53a-4c65-b7db-25d3b8b25187n%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/62213503-a53a-4c65-b7db-25d3b8b25187n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/fb15b457-7816-410f-9ec4-7a2e65ca550cn%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/fb15b457-7816-410f-9ec4-7a2e65ca550cn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/cc5a5ec4-fe9d-4e43-ae90-5501c66d6bd4n%40googlegroups.com.
