Hi Hans, I had a look at the library but with the current set-up I cannot solve it with aliases since PICs can have multiple ports that support interrupt on change and the library only works for one port (B).
I will give it some more thought .... Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens Rob CJ <[email protected]> Verzonden: zaterdag 28 januari 2023 15:00 Aan: [email protected] <[email protected]> Onderwerp: Re: [jallib] interrupt on change 12F1840 Hi Hans, I saw indeed that the library supports only port b. It can be fixed with aliases to also support port a but that need some work because the library is quite large. I tried to see if it compiles when I add aliases for only port a and only 1 pin and that compiles. Attached your program with using only one pin and a draft update of the change. You can at least test if 1 pin works 🙂 Note that this library is just a hack and far from complete! I was thinking of making the change in a different way so that it requires less work. So if you are patient I can make the change. Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens hans <[email protected]> Verzonden: zaterdag 28 januari 2023 11:53 Aan: jallib <[email protected]> Onderwerp: Re: [jallib] interrupt on change 12F1840 Op zaterdag 28 januari 2023 om 11:49:07 UTC+1 schreef hans: Hi Rob, I have tried but Yes but this one has no port B Op zaterdag 28 januari 2023 om 10:43:37 UTC+1 schreef [email protected]: Hi Hans, Did you check the interrupt on change sample file? Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens hans <[email protected]> Verzonden: zaterdag 28 januari 2023 10:05 Aan: jallib <[email protected]> Onderwerp: [jallib] interrupt on change 12F1840 Hello all, I would like to apply an interrupt on change in a 12F1840. Does anyone have an example of this? retgards Hans -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/65c3df4a-bc83-487b-b058-e67fa7ef3029n%40googlegroups.com<https://groups.google.com/d/msgid/jallib/65c3df4a-bc83-487b-b058-e67fa7ef3029n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/c8e79cd7-4a56-4c8c-80e4-c8d6afb18388n%40googlegroups.com<https://groups.google.com/d/msgid/jallib/c8e79cd7-4a56-4c8c-80e4-c8d6afb18388n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/GVXP195MB16371BC45D3D327F9AF3DDB0E6CD9%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM<https://groups.google.com/d/msgid/jallib/GVXP195MB16371BC45D3D327F9AF3DDB0E6CD9%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/GVXP195MB1637D991F751610ED0CDBB30E6CD9%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM.
