We could remove the samples related to the interrupt on change library, and keep the lib where it is or rename it.
Rob, is there a better way to make a library? Ideally we would want one library that works on all devices. Matt. On Tuesday, January 31, 2023 at 12:58:14 PM UTC-5 [email protected] wrote: > Hi Matt, > > I had a look at the library but with the current - but clever - set-up it > is not easy to change by using the same set-up. > > Since I updated the sample program of Hans I can add that too as a sample > file that does not use the library. > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens hans < > [email protected]> > *Verzonden:* dinsdag 31 januari 2023 07:47 > > *Aan:* jallib <[email protected]> > *Onderwerp:* Re: [jallib] interrupt on change 12F1840 > Hi Matt, > Please leave it so it is, i use it in older programs. > regards > Hans > > Op maandag 30 januari 2023 om 23:35:12 UTC+1 schreef [email protected] > : > > Should we remove the interrupt on change library? > > This sample shows a good example of how to use interrupt on change without > a library: > 18f4620_interrupt_on_change_pin_b0.jal > > Or does someone want to update the library? > > Matt. > > On Saturday, January 28, 2023 at 2:42:08 PM UTC-5 [email protected] > wrote: > > Hi Hans, > > Good to hear that. I could add it as sample file as a version that does > not use a library. > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens hans < > [email protected]> > *Verzonden:* zaterdag 28 januari 2023 20:33 > > *Aan:* jallib <[email protected]> > *Onderwerp:* Re: [jallib] interrupt on change 12F1840 > Hi Rob, > Works fine,, base for a sample ?? > regards > Hans > > Op zaterdag 28 januari 2023 om 17:15:05 UTC+1 schreef [email protected]: > > Hi Hans, > > It was easier to update your program than changing the library. I think > with the current set-up is it not easy to change the library but maybe > someone else has a brilliant idea. > > Attached your program version that compiles and not using the library. It > was not tested, I leave that up to you. > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens Rob CJ < > [email protected]> > *Verzonden:* zaterdag 28 januari 2023 16:46 > > *Aan:* [email protected] <[email protected]> > *Onderwerp:* Re: [jallib] interrupt on change 12F1840 > Hi Hans, > > I had a look at the library but with the current set-up I cannot solve it > with aliases since PICs can have multiple ports that support interrupt on > change and the library only works for one port (B). > > I will give it some more thought .... > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens Rob CJ < > [email protected]> > *Verzonden:* zaterdag 28 januari 2023 15:00 > *Aan:* [email protected] <[email protected]> > *Onderwerp:* Re: [jallib] interrupt on change 12F1840 > > Hi Hans, > > I saw indeed that the library supports only port b. It can be fixed with > aliases to also support port a but that need some work because the library > is quite large. > > I tried to see if it compiles when I add aliases for only port a and only > 1 pin and that compiles. Attached your program with using only one pin and > a draft update of the change. You can at least test if 1 pin works 🙂 > > *Note that this library is just a hack and far from complete!* I was > thinking of making the change in a different way so that it requires less > work. > > So if you are patient I can make the change. > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens hans < > [email protected]> > *Verzonden:* zaterdag 28 januari 2023 11:53 > *Aan:* jallib <[email protected]> > *Onderwerp:* Re: [jallib] interrupt on change 12F1840 > > Op zaterdag 28 januari 2023 om 11:49:07 UTC+1 schreef hans: > > Hi Rob, > I have tried but Yes but this one has no port B > > Op zaterdag 28 januari 2023 om 10:43:37 UTC+1 schreef [email protected]: > > Hi Hans, > > Did you check the interrupt on change sample file? > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens hans < > [email protected]> > *Verzonden:* zaterdag 28 januari 2023 10:05 > *Aan:* jallib <[email protected]> > *Onderwerp:* [jallib] interrupt on change 12F1840 > > Hello all, > I would like to apply an interrupt on change in a 12F1840. Does anyone > have an example of this? > retgards > Hans > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/65c3df4a-bc83-487b-b058-e67fa7ef3029n%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/65c3df4a-bc83-487b-b058-e67fa7ef3029n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/c8e79cd7-4a56-4c8c-80e4-c8d6afb18388n%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/c8e79cd7-4a56-4c8c-80e4-c8d6afb18388n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/GVXP195MB16371BC45D3D327F9AF3DDB0E6CD9%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM > > <https://groups.google.com/d/msgid/jallib/GVXP195MB16371BC45D3D327F9AF3DDB0E6CD9%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/GVXP195MB1637D991F751610ED0CDBB30E6CD9%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM > > <https://groups.google.com/d/msgid/jallib/GVXP195MB1637D991F751610ED0CDBB30E6CD9%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/ee106fc0-73db-4cd1-adb1-7d91bee94d60n%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/ee106fc0-73db-4cd1-adb1-7d91bee94d60n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/4093e06c-df87-4ae4-b123-edb39e8d2c1dn%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/4093e06c-df87-4ae4-b123-edb39e8d2c1dn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/3f66c2b3-a073-4fd2-9d79-3302611ab444n%40googlegroups.com.
