Hi Hans, What I see on Internet about the Daikin protocol is that the message length is not always the same and that is not the same as the NEC protocol which has a fixed length.
But I may be wrong. I attached the two files to this discussion. Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens hans <[email protected]> Verzonden: dinsdag 29 augustus 2023 16:44 Aan: jallib <[email protected]> Onderwerp: Re: [jallib] DAIKIN REMOTE I think NEC is the same system and am therefore looking for the libs for this. I can't handle the Gitthub . Where can I find the libs 16F877a_nec_rc_decode.jalr and the nec_rc_decoder.jal Op maandag 28 augustus 2023 om 20:46:19 UTC+2 schreef hans: Hello Rob, Searching the internet is my basic approach. What I found doesn't work for me. I now know what a bit looks like and I know its structure. I would now like to have a program that can read those bits concatenated into bytes I have no idea how I would go about doing that. regards Hans Op maandag 28 augustus 2023 om 19:04:20 UTC+2 schreef Rob CJ: Hi Hans, Maybe look on the internet if people already figured this out. I saw there is some info there but not sure if that is the info you are looking for. BTW. A tip for your program. You are declaring an array with constant values as var. You can save RAM memory by defining the array as const. You have way more const memory than var memory. Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens hans <[email protected]> Verzonden: maandag 28 augustus 2023 13:33 Aan: jallib <[email protected]> Onderwerp: [jallib] DAIKIN REMOTE Daikin air conditioner remote control. I have two daikins that are operated with infrared. After hours of puzzling, I've come to the point where I can turn them both on and off in the heating position. I would also like to know the other functions, but I dread all that work. I read the remote control with a scope and then figure out the values. Is there anyone who has already done this? Otherwise I would like to have a system to read the signals from the remote control. regards Hans -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/2c2df2f5-f93b-403d-a414-a52cf4504571n%40googlegroups.com<https://groups.google.com/d/msgid/jallib/2c2df2f5-f93b-403d-a414-a52cf4504571n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/7dda8812-a46c-49fe-b8f9-a3e42b86ad1an%40googlegroups.com<https://groups.google.com/d/msgid/jallib/7dda8812-a46c-49fe-b8f9-a3e42b86ad1an%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/GVXP195MB163703F64767C4CDC4C5185BE6E7A%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM.
16f877a_nec_rc_decoder.jal
Description: 16f877a_nec_rc_decoder.jal
nec_rc_decoder.jal
Description: nec_rc_decoder.jal
