Hi Rob Thank you. NEC is therefore: -- Logical '0': A 562.5 us pulse burst followed by a 562.5 us space, -- with a total transmit time of 1,125 ms -- Logical '1': A 562.5 us pulse burst followed by a 1.6875ms space, -- with a total transmit time of 2.25 ms
My system currently works with: -- Logical '0': usec_delay(450) pulse burst followed by a usec_delay(350) space, -- with a total transmit time of 800 -- Logical '1': usec_delay(450pulse burst followed by a usec_delay(1190) space, -- with a total transmit time of 1640 Some publications mention 500 followed by 440 or 1300 uS If I am able to read the different ranges of the remote control, I think I can get further. regards Hans Op dinsdag 29 augustus 2023 om 18:43:48 UTC+2 schreef Rob CJ: > Hi Hans, > > What I see on Internet about the Daikin protocol is that the message > length is not always the same and that is not the same as the NEC protocol > which has a fixed length. > > But I may be wrong. I attached the two files to this discussion. > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens hans < > [email protected]> > *Verzonden:* dinsdag 29 augustus 2023 16:44 > *Aan:* jallib <[email protected]> > *Onderwerp:* Re: [jallib] DAIKIN REMOTE > > I think NEC is the same system and am therefore looking for the libs for > this. I can't handle the Gitthub . Where can I find the libs > 16F877a_nec_rc_decode.jalr and the nec_rc_decoder.jal > > Op maandag 28 augustus 2023 om 20:46:19 UTC+2 schreef hans: > > Hello Rob, > Searching the internet is my basic approach. What I found doesn't work for > me. > I now know what a bit looks like and I know its structure. > I would now like to have a program that can read those bits concatenated > into bytes I have no idea how I would go about doing that. > regards > Hans > > Op maandag 28 augustus 2023 om 19:04:20 UTC+2 schreef Rob CJ: > > Hi Hans, > > Maybe look on the internet if people already figured this out. I saw there > is some info there but not sure if that is the info you are looking for. > > BTW. A tip for your program. You are declaring an array with constant > values as * var.* You can save RAM memory by defining the array as *const. > *You have way more const memory than var memory. > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens hans < > [email protected]> > *Verzonden:* maandag 28 augustus 2023 13:33 > *Aan:* jallib <[email protected]> > *Onderwerp:* [jallib] DAIKIN REMOTE > > Daikin air conditioner remote control. > I have two daikins that are operated with infrared. After hours of > puzzling, I've come to the point where I can turn them both on and off in > the heating position. I would also like to know the other functions, but I > dread all that work. > I read the remote control with a scope and then figure out the values. > Is there anyone who has already done this? > Otherwise I would like to have a system to read the signals from the > remote control. > regards > Hans > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/2c2df2f5-f93b-403d-a414-a52cf4504571n%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/2c2df2f5-f93b-403d-a414-a52cf4504571n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/7dda8812-a46c-49fe-b8f9-a3e42b86ad1an%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/7dda8812-a46c-49fe-b8f9-a3e42b86ad1an%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/c070c349-ddea-4ec2-b020-4614d769831cn%40googlegroups.com.
