Hi Mike, Some questions. What does PLL HW/SW mean and what does undefined mean?
The speed also depends on the speed of I2C device. If things go too fast, it might apply clock stretching to slow down the I2C host. Do you know if that is the case? And would or high speeds I2C hardware be an option? Kind regards, Rob ________________________________ Van: 'Mike' via jallib <[email protected]> Verzonden: zondag 1 maart 2026 16:20 Aan: jallib <[email protected]> Onderwerp: Re: [jallib] Re: I2C software library request Here's some Sunday morning testing trivia. I was surprised how slow everything was. All testing was done on a 12F1840, since it is software selectable up to 32MHz. [Screenshot from 2026-03-01 10-13-42.png] On Sunday, March 1, 2026 at 3:33:48 AM UTC-5 Rob CJ wrote: Hi Mike, Thanks for testing. I added the update to Github. I saw that the bee package was already made so it will be in the next version. Kind regards, Rob ________________________________ Van: 'Mike' via jallib <[email protected]> Verzonden: zaterdag 28 februari 2026 23:14 Aan: jallib <[email protected]> Onderwerp: Re: [jallib] Re: I2C software library request Hi Rob, I tested the "no delay" speed setting on a 12F683 running on the 8MHz internal oscillator and connected to a 128x32 I2C OLED display and it worked just fine. I'll try faster (crystals) at some point, as well as the 32MHz internal oscillator of the 12F1840 and 16F1825 that I know I have. Regards, Mike On Saturday, February 28, 2026 at 11:18:12 AM UTC-5 Rob CJ wrote: Hi Mike, Seems like a good addtion. I updated the library with your suggestion. If you are OK with it, I will add it to Jallib. I also added some extra info about the bus speeds. Kind regards, Rob ________________________________ Van: 'Mike' via jallib <[email protected]> Verzonden: zaterdag 28 februari 2026 16:56 Aan: jallib <[email protected]> Onderwerp: [jallib] Re: I2C software library request The code should have been this: procedure _i2c_wait() is if i2c_bus_speed == 255 then return elsif _i2c_bus_speed == 10 then ; i2c_1MHz delay_1us() return elsif _i2c_bus_speed == 4 then ; i2c_400kHz delay_2us() return else ; i2c_100kHz delay_5us() return end if end procedure On Saturday, February 28, 2026 at 10:51:01 AM UTC-5 Mike wrote: The current I2C software library supports three speeds: 1MHz, 400kHz, and 100kHz. But many aftermarket I2C devices can go much faster than that, such as the small OLED displays. Long ago I modified my local copy of the library to support an "unlimited" speed and I'm asking that this option be added to jallib. See below. Regards, Mike procedure _i2c_wait() is if i2c_bus_speed == 255 then return if _i2c_bus_speed == 10 then ; i2c_1MHz delay_1us() return elsif _i2c_bus_speed == 4 then ; i2c_400kHz delay_2us() return else ; i2c_100kHz delay_5us() return end if end procedure -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/jallib/5a402fef-1c22-4228-8d65-9caf569c4346n%40googlegroups.com<https://groups.google.com/d/msgid/jallib/5a402fef-1c22-4228-8d65-9caf569c4346n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/jallib/5c386650-0eb8-4b9d-ba00-333ca4fee698n%40googlegroups.com<https://groups.google.com/d/msgid/jallib/5c386650-0eb8-4b9d-ba00-333ca4fee698n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion visit https://groups.google.com/d/msgid/jallib/0eca8088-1242-4390-b996-b5169a4b25a2n%40googlegroups.com<https://groups.google.com/d/msgid/jallib/0eca8088-1242-4390-b996-b5169a4b25a2n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/jallib/GVXPR02MB120980BA9556A5BBA51ED99CEE67EA%40GVXPR02MB12098.eurprd02.prod.outlook.com.
