----------------------------------------------------------------
BEFORE YOU POST, search the faq at <http://java.apache.org/faq/>
WHEN YOU POST, include all relevant version numbers, log files,
and configuration files. Don't make us guess your problem!!!
----------------------------------------------------------------
Hello,
I installed apache and JServ from the same RPM I founf at rpmfind.org. I
appended the jserv.conf file to the end of the httpd.conf file and added lines
to add the Jserv module. I had to comment out two AddModule lines in doing so
because I don't have them.
When I try to start Apache now, it runs into an error inside the IfModule block
when it encounters ApJServManual. To me this means that the JServ module was
loaded (? because the inside of the IfModule block is being reached).
My setup:
Linux-Mandrake 6.1 (kernel version 2.2.13)
Apache 1.3.2
I'd sure appreciate anyone who could help set me straight.
My current httpd.conf file which throws the following error: Syntax error on
line 362 of /etc/httpd/conf/httpd.conf: Invalid Command 'ApJServManual', perhaps
mis-spelled or defined by a module not included in the server configuration.
#
## httpd.conf -- Apache HTTP server configuration file
##
# This is the main server configuration file. See URL http://www.apache.org/
# for instructions.
# Do NOT simply read the instructions in here without understanding
# what they do, if you are unsure consult the online docs. You have been
# warned.
# Originally by Rob McCool
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
#
# Example:
# LoadModule foo_module libexec/mod_foo.so
#
# Documentation for modules is in "/home/httpd/manual/mod" in HTML format.
#LoadModule mmap_static_module modules/mod_mmap_static.so
LoadModule env_module modules/mod_env.so
# I commented this un:
#LoadModule config_log_module modules/mod_log_config.so
LoadModule agent_log_module modules/mod_log_agent.so
LoadModule referer_log_module modules/mod_log_referer.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule mime_module modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule status_module modules/mod_status.so
LoadModule info_module modules/mod_info.so
LoadModule includes_module modules/mod_include.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule dir_module modules/mod_dir.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule asis_module modules/mod_asis.so
LoadModule imap_module modules/mod_imap.so
LoadModule action_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
# I commented this one out:
#LoadModule proxy_module modules/libproxy.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule anon_auth_module modules/mod_auth_anon.so
#LoadModule dbm_auth_module modules/mod_auth_dbm.so
LoadModule db_auth_module modules/mod_auth_db.so
LoadModule digest_module modules/mod_digest.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule example_module modules/mod_example.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule jserv_module /usr/lib/apache/mod_jserv.so
# Extra Modules
#LoadModule php_module modules/mod_php.so
#LoadModule php3_module modules/libphp3.so
#LoadModule perl_module modules/libperl.so
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule mod_mmap_static.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_log_agent.c
AddModule mod_log_referer.c
#AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_proxy.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
#AddModule mod_auth_dbm.c
AddModule mod_auth_db.c
AddModule mod_digest.c
#AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
#AddModule mod_example.c
#AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
AddModule mod_jserv.c
# Extra Modules
#AddModule mod_php.c
#AddModule mod_php3.c
#AddModule mod_perl.c
# ServerType is either inetd, or standalone.
ServerType standalone
# If you are running from inetd, go to "ServerAdmin".
# Port: The port the standalone listens to. For ports < 1023, you will
# need httpd to be run as root initially.
Port 80
# HostnameLookups: Log the names of clients or just their IP numbers
# e.g. www.apache.org (on) or 204.62.129.132 (off)
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on.
HostnameLookups off
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# On SCO (ODT 3) use User nouser and Group nogroup
# On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group nobody on these systems!
User nobody
Group nobody
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.
ServerAdmin root@localhost
# ServerRoot: The directory the server's config, error, and log files
# are kept in.
# NOTE! If you intend to place this on a NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation,
# you will save yourself a lot of trouble.
ServerRoot /etc/httpd
# BindAddress: You can support virtual hosts with this option. This option
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the VirtualHost directive.
#BindAddress *
# ErrorLog: The location of the error log file. If this does not start
# with /, ServerRoot is prepended to it.
ErrorLog logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location of the access logfile (Common Logfile Format).
# If this does not start with /, ServerRoot is prepended to it.
CustomLog logs/access_log common
# If you would like to have an agent and referer logfile uncomment the
# following directives.
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
# If you prefer a single logfile with access, agent and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access_log combined
# PidFile: The file the server should log its pid to
PidFile /var/run/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file is created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile /var/run/httpd.scoreboard
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#
#LockFile /var/lock/httpd.lock
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e. use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
#ServerName new.host.name
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a url that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGIs.
UseCanonicalName on
# CacheNegotiatedDocs: By default, Apache sends Pragma: no-cache with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# Timeout: The number of seconds before receives and sends time out
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We reccomend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. These values are probably OK for most sites ---
MinSpareServers 8
MaxSpareServers 20
# Number of servers to start --- should be a reasonable ballpark figure.
StartServers 10
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# Unix with it as it spirals down...
MaxClients 150
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies.
# The child will exit so as to avoid problems after prolonged use when
# Apache (and maybe the libraries it uses) leak. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries.
MaxRequestsPerChild 100
# Proxy Server directives. Uncomment the following line to
# enable the proxy server:
#ProxyRequests On
# To enable the cache as well, edit and uncomment the following lines:
#CacheRoot /var/cache/httpd
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the VirtualHost command
#Listen 3000
#Listen 12.34.56.78:80
# VirtualHost: Allows the daemon to respond to requests for more than one
# server address, if your server machine is configured to accept IP packets
# for multiple addresses. This can be accomplished with the ifconfig
# alias flag, or through kernel patches like VIF.
# Any httpd.conf or srm.conf directive may go into a VirtualHost command.
# See also the BindAddress entry.
#<VirtualHost host.some_domain.com>
#ServerAdmin [EMAIL PROTECTED]
#DocumentRoot /www/docs/host.some_domain.com
#ServerName host.some_domain.com
#ErrorLog logs/host.some_domain.com-error_log
#TransferLog logs/host.some_domain.com-access_log
#</VirtualHost>
###############################################################################
# Apache JServ Configuration File #
###############################################################################
# Note: this file should be appended or included into your httpd.conf
# Tell Apache on win32 to load the Apache JServ communication module
#LoadModule jserv_module modules/ApacheModuleJServ.dll
# Tell Apache on Unix to load the Apache JServ communication module
# For shared object builds only!!!
<IfModule mod_jserv.c>
# Whether Apache must start Apache JServ or not (On=Manual Off=Autostart)
# Syntax: ApJServManual [on/off]
# Default: "Off"
ApJServManual off
# Properties filename for Apache JServ in Automatic Mode.
# In manual mode this directive is ignored
# Syntax: ApJServProperties [filename]
# Default: "./conf/jserv.properties"
ApJServProperties /etc/httpd/conf/jserv/jserv.properties
# Log file for this module operation relative to Apache root directory.
# Set the name of the trace/log file. To avoid possible confusion about
# the location of this file, an absolute pathname is recommended.
#
# This log file is different than the log file that is in the
# jserv.properties file. This is the log file for the C portion of Apache
# JServ.
#
# On Unix, this file must have write permissions by the owner of the JVM
# process. In other words, if you are running Apache JServ in manual mode
# and Apache is running as user nobody, then the file must have its
# permissions set so that that user can write to it.
# Syntax: ApJServLogFile [filename]
# Default: "./logs/mod_jserv.log"
# Note: when set to "DISABLED", the log will be redirected to Apache error log
ApJServLogFile /var/log/httpd/mod_jserv.log
# Log Level for this module
# Syntax: ApJServLogLevel [debug|info|notice|warn|error|crit|alert|emerg]
# Default: info (unless compiled w/ JSERV_DEBUG, in which case it's debug)
ApJServLogLevel notice
# Protocol used by this host to connect to Apache JServ
# (see documentation for more details on available protocols)
# Syntax: ApJServDefaultProtocol [name]
# Default: "ajpv12"
ApJServDefaultProtocol ajpv12
# Default host on which Apache JServ is running
# Syntax: ApJServDefaultHost [hostname]
# Default: "localhost"
#ApJServDefaultHost java.apache.org
# Default port that Apache JServ is listening to
# Syntax: ApJServDefaultPort [number]
# Default: protocol-dependant (for ajpv12 protocol this is "8007")
ApJServDefaultPort 8007
# The amount of time to give to the JVM to start up as well
# as the amount of time to wait to ping the JVM to see if it
# is alive. Slow or heavily loaded machines might want to
# increase this value.
# Default: 10 seconds
# ApJServVMTimeout 10
# Passes parameter and value to specified protocol.
# Syntax: ApJServProtocolParameter [name] [parameter] [value]
# Default: NONE
# Note: Currently no protocols handle this. Introduced for future protocols.
# Apache JServ secret key file relative to Apache root directory.
# Syntax: ApJServSecretKey [filename]
# Default: "./conf/jserv.secret.key"
# Warning: if authentication is DISABLED, everyone on this machine (not just
# this module) may connect to your servlet engine and execute servlet
# bypassing web server restrictions. See the documentation for more information
#ApJServSecretKey DISABLED
ApJServSecretKey /etc/httpd/conf/jserv/jserv.secret.key
# Mount point for Servlet zones
# (see documentation for more information on servlet zones)
# Syntax: ApJServMount [name] [jserv-url]
# Default: NONE
# Note: [name] is the name of the Apache URI path to mount jserv-url on
# [jserv-url] is something like "protocol://host:port/zone"
# If protocol, host or port are not specified, the values from
# "ApJServDefaultProtocol", "ApJServDefaultHost" or "ApJServDefaultPort"
# will be used.
# If zone is not specified, the zone name will be the first subdirectory of
# the called servlet.
# Example: "ApJServMount /servlets /myServlets"
# if user requests "http://host/servlets/TestServlet"
# the servlet "TestServlet" in zone "myServlets" on default host
# thru default protocol on defaul port will be requested
# Example: "ApJServMount /servlets ajpv12://localhost:8007"
# if user requests "http://host/servlets/myServlets/TestServlet"
# the servlet "TestServlet" in zone "myServlets" will be requested
# Example: "ApJServMount /servlets ajpv12://jserv.mydomain.com:15643/myServlets"
# if user requests "http://host/servlets/TestServlet" the servlet
# "TestServlet" in zone "myServlets" on host "jserv.mydomain.com" using
# "ajpv12" protocol on port "15643" will be executed
ApJServMount /servlets /root
ApJServMount /servlet /root
# Whether <VirtualHost> inherits base host mount points or not
# Syntax: ApJServMountCopy [on/off]
# Default: "On"
# Note: This directive is meaninful only when virtual hosts are being used
ApJServMountCopy on
# Executes a servlet passing filename with proper extension in PATH_TRANSLATED
# property of servlet request.
# Syntax: ApJServAction [extension] [servlet-uri]
# Defaults: NONE
# Notes: This is used for external tools.
#ApJServAction .jsp /servlets/org.gjt.jsp.JSPServlet
#ApJServAction .gsp /servlets/com.bitmechanic.gsp.GspServlet
#ApJServAction .jhtml /servlets/org.apache.servlet.ssi.SSI
#ApJServAction .xml /servlets/org.apache.cocoon.Cocoon
# Enable the Apache JServ status handler with the URL of
# "http://servername/jserv/" (note the trailing slash!)
# Change the "deny" directive to restrict access to this status page.
<Location /jserv/>
SetHandler jserv-status
order deny,allow
deny from all
allow from localhost
</Location>
############################## W A R N I N G ##################################
# Remember to disable or otherwise protect the execution of the Apache JServ #
# Status Handler (see right above) on a production environment since this may #
# give untrusted users the ability to obtain restricted information on your #
# servlets and their initialization arguments such as JDBC passwords and #
# other important information. The Apache JServ Status Handler should be #
# accessible only by system administrators. #
###############################################################################
</IfModule>
--
--------------------------------------------------------------
Please read the FAQ! <http://java.apache.org/faq/>
To subscribe: [EMAIL PROTECTED]
To unsubscribe: [EMAIL PROTECTED]
Archives and Other: <http://java.apache.org/main/mail.html>
Problems?: [EMAIL PROTECTED]
