Thank you for replying. I have it scanning now. My hopeful last question concerns scanning a large book. I tried following the below directions but the pages did not end up in order.
1. I began with the automatic workflow scanning the odd pages. 2. I pressed the escape to stop the auto scan and turned over the book so that I could now scan the odd pages 3. I tabbed and then down arrowed to the turn over page button and began scanning. 4. I stopped the scanning process. When I started to read the book, the pages were not in their odd even order. First came all the odd pages throughout the book. Did I miss something? The purpose of this option was to save you from moving the book everytime you scan a new page. Any ideas would be appreciated! Russ -----Original Message----- From: jaws-users-list-boun...@jaws-users.com [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of caroline ward Sent: Saturday, August 21, 2010 1:54 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Pearl not scanning did you try to turn on the light ----- Original Message ----- From: "Steve" <k...@sbcglobal.net> To: <jaws-users-list@jaws-users.com> Sent: Saturday, August 21, 2010 1:06 PM Subject: Re: [JAWS-Users] Pearl not scanning > Russ, > > Okay, I think they may have an issue here. The Perl worked fine on my > 32-bit XP machine. When I hooked it up on my wife's Win 7 64-bit machine, > it clicks as if it would recognize a page, but every page it scans is > blank. My wife also uses Jaws on that machine. So far, the different > troubleshooting steps I've taken have not resolved the issue on her Win 7 > machine. > > If I make more progress today, I'll let you know and if you hear any > pearls of wisdom (pun intended) from Freedumb Scientific, I'd appreciate > it. > > I know this isn't strictly Jaws-related, so David if you'd like us to go > off-list I'll understand. > > Steve > Lansing, MI > > ----- Original Message ----- > From: "Russ Hubley" <hubbor...@comcast.net> > To: <jaws-users-list@jaws-users.com> > Sent: Friday, August 20, 2010 4:04 PM > Subject: Re: [JAWS-Users] Pearl not scanning > > >> Steve, thank you for responding >> Yes, I did this. >> >> I called FS support today and they were stumped. We hooked up with Tandom >> but found nothing. They gave me a ticket number and said they could call >> back. >> > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
