Hi RJ, Try the following; 1. Press Iinsert + 6, on the number row above the main keyboard for the Settings Center. 2. Now, press control, shift, + D, for default all applications. 3. Type, graphics, into the search box, wait a couple of seconds for the list to populate, then arrow down to, graphics & symbols, & press enter. 4. Now, right arrow to open, & arrow down to, Graphic Verbosity. 5. Press the spacebar until you hear Jaws report, labeled graphics, tab to okay , press enter to save your changes & close the settings center.
You can also do this in Jaws Options by doing the following; 1. From whatever application you are in, press Insert + V, for Jaws options. 2. Type, graphics, into the search box, wait a couple of seconds for the list to populate, then arrow down to, graphics, & Press the spacebar to toggle through your options 3. Press the context / applications key, arrow down to make sure that, save the settings is checked, press enter on it if it isn't. 4. Now, tab to okay & press enter. If I screwed these steps up in any way, someone please jump in & straighten me out! Hope this helped. Take care. Mike ----- Original Message ----- From: RJ To: Users Sent: Friday, May 04, 2012 7:49 PM Subject: [JAWS-Users] Graphics and labels Where in the setting can you get Jaw 13 to stop announcing the graphics and just the labels For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
