Thanked Mike.
----- Original Message -----
From: "Mike & Barbara" <[email protected]>
To: <[email protected]>
Sent: Saturday, May 05, 2012 9:34 AM
Subject: Re: [JAWS-Users] Graphics and labels
Hi RJ,
Try the following;
1. Press Iinsert + 6, on the number row above the main keyboard for the
Settings Center.
2. Now, press control, shift, + D, for default all applications.
3. Type, graphics, into the search box, wait a couple of seconds for the
list to populate, then arrow down to, graphics & symbols, & press enter.
4. Now, right arrow to open, & arrow down to, Graphic Verbosity.
5. Press the spacebar until you hear Jaws report, labeled graphics, tab to
okay , press enter to save your changes & close the settings center.
You can also do this in Jaws Options by doing the following;
1. From whatever application you are in, press Insert + V, for Jaws
options.
2. Type, graphics, into the search box, wait a couple of seconds for the
list to populate, then arrow down to,
graphics, & Press the spacebar to toggle through your options
3. Press the context / applications key, arrow down to make sure that,
save
the settings is checked, press enter on it if it isn't.
4. Now, tab to okay & press enter.
If I screwed these steps up in any way, someone please jump in &
straighten
me out! Hope this helped. Take care.
Mike
----- Original Message -----
From: RJ
To: Users
Sent: Friday, May 04, 2012 7:49 PM
Subject: [JAWS-Users] Graphics and labels
Where in the setting can you get Jaw 13 to stop announcing the graphics
and just the labels
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
