Hi David, would you let the list know? Though I don't have one I'm curious what's it's problem. Maybe not enough coffee? ;) Good luck. Siobhan On Aug 14, 2013, at 8:11 AM, "David Whitehead" <[email protected]> wrote:
> hello Brian; > thanks for the suggestions and the link to the file, however, nothing seems > to work. > I will call technical support for my client, and see if we can't get this > issue solved/rectified. > > I will let you know how things work out. > > take care. > > > -----Original Message----- > From: JAWS-Users-List [mailto:[email protected]] On > Behalf Of Brian Lee > Sent: Tuesday, August 13, 2013 4:43 PM > To: [email protected] > Subject: Re: [JAWS-Users] jaws and braille display; > > Hello David, > > I had the same problem until a HIMS tech had me download a newer USB driver. > I am using Windows 8 and a 64-bit system. There is a link below that you > can use to download the USB driver he had me install if you want to try it. > Your display should be in the USB mode. The switch on the side should be in > the position toward you. If it is slid toward the back then Bluetooth mode > is active. Terminal mode using a USB connection is what you want. You > should unload JAWS after installing the USB driver. Put the display in USB > mode with terminal mode chosen. After installing the USB driver you might > even want to turn the display off, unload JAWS, turn the display back on and > get it back into terminal mode using USB and reload JAWS. The link below is > for a zip file. You will need to open the .ZIP file to find the > installation file for the driver. I hope you get it working. > > https://dl.dropboxusercontent.com/u/3951772/HIMS_USB_Driver_v25.zip > > Take care. > > Brian Lee > [email protected] > > -----Original Message----- > From: JAWS-Users-List [mailto:[email protected]] On > Behalf Of David Whitehead > Sent: Tuesday, August 13, 2013 11:56 AM > To: [email protected] > Subject: Re: [JAWS-Users] jaws and braille display; > > hello there; > > well, regardless what I do, I cannot get the braille edge out of terminal > mode. > > not sure if the drivers are loading properly or, just what the issue is. > > > > -----Original Message----- > From: JAWS-Users-List [mailto:[email protected]] On > Behalf Of Steve > Sent: Tuesday, August 13, 2013 11:37 AM > To: [email protected] > Subject: Re: [JAWS-Users] jaws and braille display; > > When I did tech support as a GwMicro dealer, you got the Braille Edge out of > > terminal mode by having it connected as you do. When you start your > computer, and it comes up in terminal mode, unload and then reload Jaws. > > Don't know if that helps with the current version, but give it a shot. You > completely unload Jaws with Windows-Insert-F4. > > Take my advice, I don't use it anyway. > > Steve > Lansing, MI > ----- Original Message ----- > From: "David Whitehead" <[email protected]> > To: <[email protected]> > Sent: Tuesday, August 13, 2013 10:17 AM > Subject: Re: [JAWS-Users] jaws and braille display; > > >> hello Flor; >> yes, I did go to add, >> the Synthesizer and braille manager; >> I do see the braille edge, which is selected, >> however, the only braille I see is, >> terminal mode. >> I restarted jaws, as was prompted, >> restarted computer with the device connected, however still no braille. >> very strange. >> >> -----Original Message----- >> From: JAWS-Users-List [mailto:[email protected]] On >> Behalf Of Flor Lynch >> Sent: Tuesday, August 13, 2013 10:03 AM >> To: [email protected] >> Subject: Re: [JAWS-Users] jaws and braille display; >> >> JAWS will not see this display automatically. Did you look in JAWS >> Options, add a braille display? Then, in the Synthesizer and braille >> manager; Does JAWS see the braille Edge among those listed? if another >> braille display is still the default, then you will need to change that >> and/or remove it, if JAWS still doesn't see the braille Edge. if there >> are no active braille displays, you need to tell JAWS (check) the >> Braille Edge. Add it in via the Synthesizer and braille manager. If not >> known as Braille Edge, it may be called Braille Sense. >> >> ----- Original Message ----- >> From: "David Whitehead" <[email protected]> >> To: <[email protected]> >> Sent: Tuesday, August 13, 2013 2:42 PM >> Subject: Re: [JAWS-Users] jaws and braille display; >> >> >>> Hi; >>> >>> well, no question is a stupid question, >>> however, yes I did reboot, jaws, infact, I also rebooted the computer, >>> same >>> result, terminal mode. >>> >>> >>> >>> -----Original Message----- >>>> From: JAWS-Users-List [mailto:[email protected]] >>>> On >>> Behalf Of Siobhan >>> Sent: Tuesday, August 13, 2013 9:28 AM >>> To: [email protected] >>> Subject: Re: [JAWS-Users] jaws and braille display; >>> >>> Hi David. Ok stupid question here, but did you reboot Jaws after you >>> installed the driver? I know my Blue needed that done when I did it. >>> Just a >>> thought. >>> Siobhan >>> On Aug 13, 2013, at 7:51 AM, "David Whitehead" >>> <[email protected]> wrote: >>> >>>> hello Flor; >>>> well, I did download the braille edge driver for jaws, >>>> however, once I did the install, >>>> and connected the display, >>>> all I see/read is, terminal mode. >>>> >>>> not sure what's going on. >>>> >>>> >>>> >>>> -----Original Message----- >>>> From: JAWS-Users-List [mailto:[email protected]] >>>> On >>>> Behalf Of Flor Lynch >>>> Sent: Monday, August 12, 2013 5:24 PM >>>> To: [email protected] >>>> Subject: Re: [JAWS-Users] jaws and braille display; >>>> >>>> I'm using a focus40 bluee. If you don't have the braille Edge driver >>>> for >>>> JAWS, you need to download it from: >>>> >>>> >>> >> > http://www.hims-inc.com/resource-center/braille-edge-40/#Jaws-Braille-EDGE-D >>>> river >>>> >>>> -- You would then run the .exe file, or else follow the instructions >>>> on >>>> the above web page. The braille Edge appears to have much in common >>>> with >>>> the braille Sense. >>>> >>>> >>>> ----- Original Message ----- >>>> From: "David Whitehead" <[email protected]> >>>> To: <[email protected]> >>>> Sent: Monday, August 12, 2013 12:44 PM >>>> Subject: [JAWS-Users] jaws and braille display; >>>> >>>> >>>>> Good morning all; >>>>> >>>>> >>>>> >>>>> Lenovo E530 Notebook, T5VBraille Edge 40 Braille Display jaws14. >>>>> >>>>> can someone tell me how to install the braille display? >>>>> >>>>> >>>>> >>>>> For answers to frequently asked questions about this list visit: >>>>> http://www.jaws-users.com/help/ >>>>> >>>> >>>> >>>> For answers to frequently asked questions about this list visit: >>>> http://www.jaws-users.com/help/ >>>> >>>> >>>> For answers to frequently asked questions about this list visit: >>>> http://www.jaws-users.com/help/ >>> >>> >>> For answers to frequently asked questions about this list visit: >>> http://www.jaws-users.com/help/ >>> >>> >>> For answers to frequently asked questions about this list visit: >>> http://www.jaws-users.com/help/ >>> >> >> >> For answers to frequently asked questions about this list visit: >> http://www.jaws-users.com/help/ >> >> >> For answers to frequently asked questions about this list visit: >> http://www.jaws-users.com/help/ >> > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
