Did you try add new hardware wizard?
The other thing that I've had issues with on one of my computers is that the
system doesn't recognize the USB hub. If you connect a device, you get the
chime but it does not recognize the device. If I run a system restore to
when I knew the things were working, it comes up fine again.
First, Rich, see this article from Microsoft and try the different methods
they suggest. Also note they have a related article for other workarounds
if the ones here ddon't work.
http://support.microsoft.com/kb/871233
Another issue is that your computer may have OHCI in suspended state. YOu
can go here to have Microsoft automatically apply a registry change or you
can do it yourself
http://support.microsoft.com/kb/314634
Just a couple suggestions.
Take my advice, I don't use it anyway.
Steve
Lansing, MI
----- Original Message -----
From: "Rich" <[email protected]>
To: <[email protected]>
Sent: Sunday, September 08, 2013 6:22 PM
Subject: Re: [JAWS-Users] Can not find the drive with new devices.
Yes, the devices are turned on.
I mentioned earlier that I have a USB hub in that port and that does not
show up, other than in the "add hardware" list.
----- Original Message -----
From: "Mike B." <[email protected]>
To: <[email protected]>
Sent: Sunday, September 08, 2013 6:00 PM
Subject: Re: [JAWS-Users] Can not find the drive with new devices.
Hi Rich,
Are the devices turned on? They may not show up if they're not turned
on.
HTH
Take care.
Mike
This email was sent from my, iBarstool.
----- Original Message -----
From: Rich
To: [email protected]
Sent: Sunday, September 08, 2013 2:40 PM
Subject: Re: [JAWS-Users] Can not find the drive with new devices.
One device is a cell phone and the other is a "leap frog" reading device.
Rich
----- Original Message -----
From: "Rick Justice" <[email protected]>
To: <[email protected]>
Sent: Sunday, September 08, 2013 4:48 PM
Subject: Re: [JAWS-Users] Can not find the drive with new devices.
Hi Rich,
Not everyUSB device shows up in the list of drives.
What type of device is it?
Rick Justice
"Old people aren't dumb, they have just forgotten more
than younger people have had a chance to learn!"
----- Original Message -----
From: "Rich Hamel" <[email protected]>
To: <[email protected]>
Sent: Sunday, September 08, 2013 4:23 PM
Subject: [JAWS-Users] Can not find the drive with new devices.
Hi all
I hope the subject line is accurate.
I have XP pro and 14.0.
I am unable to find devices I plug in to my USB port .
I go to "my computer" and I see a list that includes "C" drive and CD,
etc.
but , not, the new device I plug in to the front of the PC through a USB
port.
There is a USB hub.
When I go in to control panel and add new hardware, I see a bunch of
USB
items with useless labels.
I've looked through the items in the "C" drive but nothing looks like
the
device
The software has been installed, and I hear the "ding" when I plug the
different devices in.
I assume that whenever a device is plugged in to the USB, I would see it
listed as "F" drive or something like that, in "my computer".
I don't see anything listed when I hit insert F 10 or 11 either.
Thanks for any help.
I don't have this problem on my other PC that is XP home.
Rich
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
