Hello Scott, In my message I said that you should use H followed by O followed by W to get to where you can adjust column width. I forgot to mention that you use Alt key prior to pressing H. The corrected message is below:
Use Alt followed by H followed by O followed by W, type in the width you want to use and press enter key. To confirm the change you can use the JAWS key with F command and the two numbers given at the end of the information JAWS gives you will be the width and height of the current cell or selection of cells. A quick way to confirm is to hold down JAWS key and press F twice, use CTRL end in the virtual window and then up arrow a couple times to the width and height information. Take care. Brian Lee brianl...@charter.net -----Original Message----- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Brian Lee Sent: Monday, December 30, 2013 9:44 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] office 2007 excel question. Hello Scott, Take care. Brian Lee brianl...@charter.net -----Original Message----- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of scott Meyer Sent: Monday, December 30, 2013 9:17 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] office 2007 excel question. Hi How do you change the width of columns in 2007 office excel worksheet? Using Jaws 12. Thanks Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
